Hi all,
Getting into fixes mode for omap, except for the first two
patches in this series. The first one adds a mux table for
the cm-t35 board, and second one adds a low-level serial
init function that is needed if some serial ports are left for
other drivers, such as dedicated bluetooth driver.
Other than that, the series contains various fixes from the
linux-omap list.
Regards,
Tony
---
Anand Gadiyar (1):
omap3: zoom2/3: make MMC slot work again
Cory Maccarrone (1):
omap1: htcherald: Update defconfig to include mux support
Janusz Krzysztofik (1):
omap1: LCD_DMA: Use some define rather than a hexadecimal
Kalle Valo (1):
omap3: rx51: Use wl1251 in SPI mode 3
Ladislav Michl (1):
omap: arch/arm/plat-omap/devices.c - sort alphabetically
Madhusudhan Chikkature (1):
omap3: Zoom2/3: Update hsmmc board config params
Mika Westerberg (1):
OMAP3: serial - allow platforms specify which UARTs to initialize
Mike Rapoport (1):
omap3: cm-t35: add mux initialization
Sanjeev Premi (1):
omap3: Fix OMAP35XX_REV macros
Sergey Lapin (1):
omap3: id code detection 3525 vs 3515
Vimal Singh (1):
omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
manjugk manjugk (1):
omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
vikram pandita (2):
omap: header: remove unused data-type
omap: serial: fix non-empty uart fifo read abort
arch/arm/configs/htcherald_defconfig | 9 ++
arch/arm/configs/omap_zoom2_defconfig | 3 +
arch/arm/configs/omap_zoom3_defconfig | 3 +
arch/arm/mach-omap1/include/mach/lcdc.h | 57 +++++++++++++++
arch/arm/mach-omap1/lcd_dma.c | 3 +
arch/arm/mach-omap2/Kconfig | 1
arch/arm/mach-omap2/board-cm-t35.c | 96 ++++++++++++++++++++++++--
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 -
arch/arm/mach-omap2/board-zoom-peripherals.c | 14 ++--
arch/arm/mach-omap2/id.c | 4 +
arch/arm/mach-omap2/serial.c | 88 ++++++++++++++++++++----
arch/arm/plat-omap/devices.c | 68 +++++++++---------
arch/arm/plat-omap/include/plat/board.h | 9 --
arch/arm/plat-omap/include/plat/cpu.h | 20 +++--
arch/arm/plat-omap/include/plat/gpmc.h | 2 -
arch/arm/plat-omap/include/plat/serial.h | 1
drivers/video/omap/lcdc.c | 33 ---------
17 files changed, 291 insertions(+), 122 deletions(-)
create mode 100644 arch/arm/mach-omap1/include/mach/lcdc.h
--
Signature
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
