On OMAP4430 the UART3 base address is different than that on OMAP3. Because of this existing code needs additional #ifdef'ry to accommodate that code. Hence this patch separates it. Also UART3 base address is fixed for OMAP4430 in this patch. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> --- arch/arm/mach-omap2/include/mach/debug-macro.S | 13 ++++++++++++- 1 files changed, 12 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index e9f255d..b2b4b29 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -25,7 +25,7 @@ add \rx, \rx, #0x00004000 @ UART 3 #endif -#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) +#elif CONFIG_ARCH_OMAP3 moveq \rx, #0x48000000 @ physical base address movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 @@ -36,6 +36,17 @@ add \rx, \rx, #0x00fb0000 @ UART 3 add \rx, \rx, #0x00006000 #endif +#elif CONFIG_ARCH_OMAP4 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xfa000000 @ virtua base + orr \rx, \rx, #0x0006a000 @ UART 1 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + and \rx, \rx, #0xff000000 + add \rx, \rx, #0x00020000 @ UART 3 +#endif #endif .endm -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
