Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> writes:
> "Govindraj.R" <govindraj.raja@xxxxxx> writes:
>
>> From 0f017ffac2990876331a2378e7845d91b2e0088c Mon Sep 17 00:00:00 2001
>> From: Govindraj R <govindraj.raja@xxxxxx>
>> Date: Wed, 28 Oct 2009 12:23:02 +0530
>> Subject: [PATCHv2 2/3] OMAP UART: Add platform data for omap-serial driver.
>>
>> This patch adds platform data support for omap-serial driver.
>>
>> Signed-off-by: Govindraj R <govindraj.raja@xxxxxx>
[...]
>> +#endif
>> +
>> +#ifdef CONFIG_SERIAL_OMAP
>
> Can you do this without the #ifdefs?
>
> Instead, we should drop the 8250 specifics from omap_uart_state.
>
> At first glance, the plat_serial8250_port pointer is passed around
> mainly so it can be passed to serial_read|write_reg(). If you changed
> that function to take an omap_uart_state instead, and add the base and
> regshift values to omap_uart_state you could get rid of the 8250
> pointer from omap_uart_state.
>
> Looks like omap_uart_state should also grow an irq field so
> omap_uart_idle_init() could work for both drivers.
Here's a quick first pass that shows that the plat_serial8250_port
pointer can easily be removed from omap_uart_state.
Next would be to cleanup the users of this pointer and move those
fields into omap_uart_state so that either 8250 or omap-serial init
could use them.
Kevin
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 2e17b57..b082988 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -52,7 +52,6 @@ struct omap_uart_state {
struct clk *fck;
int clocked;
- struct plat_serial8250_port *p;
struct list_head node;
struct platform_device pdev;
@@ -145,7 +144,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
*/
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
- struct plat_serial8250_port *p = uart->p;
+ struct plat_serial8250_port *p = uart->pdev.dev.platform_data;
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
@@ -158,7 +157,7 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
static void omap_uart_save_context(struct omap_uart_state *uart)
{
u16 lcr = 0;
- struct plat_serial8250_port *p = uart->p;
+ struct plat_serial8250_port *p = uart->pdev.dev.platform_data;
if (!enable_off_mode)
return;
@@ -179,7 +178,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
static void omap_uart_restore_context(struct omap_uart_state *uart)
{
u16 efr = 0;
- struct plat_serial8250_port *p = uart->p;
+ struct plat_serial8250_port *p = uart->pdev.dev.platform_data;
if (!enable_off_mode)
return;
@@ -275,7 +274,7 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
{
- struct plat_serial8250_port *p = uart->p;
+ struct plat_serial8250_port *p = uart->pdev.dev.platform_data;
u16 sysc;
sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
@@ -407,7 +406,7 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
- struct plat_serial8250_port *p = uart->p;
+ struct plat_serial8250_port *p = uart->pdev.dev.platform_data;
int ret;
uart->can_sleep = 0;
@@ -479,13 +478,15 @@ void omap_uart_enable_irqs(int enable)
{
int ret;
struct omap_uart_state *uart;
+ struct plat_serial8250_port *p;
list_for_each_entry(uart, &uart_list, node) {
+ p = uart->pdev.dev.platform_data;
if (enable)
- ret = request_irq(uart->p->irq, omap_uart_interrupt,
+ ret = request_irq(p->irq, omap_uart_interrupt,
IRQF_SHARED, "serial idle", (void *)uart);
else
- free_irq(uart->p->irq, (void *)uart);
+ free_irq(p->irq, (void *)uart);
}
}
@@ -621,7 +622,6 @@ void __init omap_serial_early_init(void)
uart->num = i;
p->private_data = uart;
- uart->p = p;
list_add_tail(&uart->node, &uart_list);
if (cpu_is_omap44xx())
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
