Now that twl4030 power support is upstream, add the original power
scripts for the 3430SDP to the board setup.
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/board-3430sdp.c | 82 +++++++++++++++++++++++++++++++++++
1 files changed, 82 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 2dfab17..a610355 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -278,6 +278,87 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1,
};
+
+static struct twl4030_ins __initdata sleep_on_seq[] = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+#ifdef CONFIG_DISABLE_HFCLK
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_OFF), 3},
+#endif
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+ .script = sleep_on_seq,
+ .size = ARRAY_SIZE(sleep_on_seq),
+ .flags = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+#ifndef CONFIG_DISABLE_HFCLK
+/*
+ * Wakeup VDD1 and VDD2.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 4},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 2},
+#else
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+#endif /* #ifndef CONFIG_DISABLE_HFCLK */
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+ .script = wakeup_seq,
+ .size = ARRAY_SIZE(wakeup_seq),
+ .flags = TWL4030_WAKEUP12_SCRIPT | TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
+};
+static struct twl4030_script wrst_script __initdata = {
+ .script = wrst_seq,
+ .size = ARRAY_SIZE(wakeup_seq),
+ .flags = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+ &sleep_on_script,
+ &wakeup_script,
+ &wrst_script,
+};
+
+static struct twl4030_power_data sdp3430_t2scripts_data __initdata = {
+ .scripts = twl4030_scripts,
+ .num = ARRAY_SIZE(twl4030_scripts),
+};
+
/*
* Apply all the fixed voltages since most versions of U-Boot
* don't bother with that initialization.
@@ -419,6 +500,7 @@ static struct twl4030_platform_data sdp3430_twldata = {
.gpio = &sdp3430_gpio_data,
.madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
+ .power = &sdp3430_t2scripts_data,
.usb = &sdp3430_usb_data,
.vaux1 = &sdp3430_vaux1,
--
1.6.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
