* Sanjeev Premi <premi@xxxxxx> [090818 09:16]:
> Add runtime check for these OMAP35x variations
> based on the detected Si features:
> OMAP3503, OMAP3515, OMAP3525 and OMA3530.
>
> Also, delayed the call to pr_info() into actual
> variant is detected in omap3_cpuinfo()
>
> Signed-off-by: Sanjeev Premi <premi@xxxxxx>
> ---
> arch/arm/mach-omap2/id.c | 59 +++++++++++++++++++++++++++-----
> arch/arm/plat-omap/include/mach/cpu.h | 25 ++++++++++++++
> 2 files changed, 74 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 03b80f2..f041d3b 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -187,7 +187,6 @@ void __init omap3_check_revision(void)
> u32 cpuid, idcode;
> u16 hawkeye;
> u8 rev;
> - char *rev_name = "ES1.0";
>
> /*
> * We cannot access revision registers on ES1.0.
> @@ -197,7 +196,7 @@ void __init omap3_check_revision(void)
> cpuid = read_cpuid(CPUID_ID);
> if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
> omap_revision = OMAP3430_REV_ES1_0;
> - goto out;
> + return;
> }
>
> /*
Looks like the above two changes break printing the ES1.0 rev
name during the boot.
> @@ -214,29 +213,21 @@ void __init omap3_check_revision(void)
> switch (rev) {
> case 0:
> omap_revision = OMAP3430_REV_ES2_0;
> - rev_name = "ES2.0";
> break;
> case 2:
> omap_revision = OMAP3430_REV_ES2_1;
> - rev_name = "ES2.1";
> break;
> case 3:
> omap_revision = OMAP3430_REV_ES3_0;
> - rev_name = "ES3.0";
> break;
> case 4:
> omap_revision = OMAP3430_REV_ES3_1;
> - rev_name = "ES3.1";
> break;
> default:
> /* Use the latest known revision as default */
> omap_revision = OMAP3430_REV_ES3_1;
> - rev_name = "Unknown revision\n";
> }
> }
> -
> -out:
> - pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
> }
>
> #define OMAP3_SHOW_FEATURE(feat) \
> @@ -248,6 +239,54 @@ out:
>
> void __init omap3_cpuinfo(void)
> {
> + u8 rev = GET_OMAP_REVISION();
> + char cpu_name[16], cpu_rev[16];
> +
> + /* OMAP3430 and OMAP3530 are assumed to be same.
> + *
> + * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
> + * on available features. Upon detection, update the CPU id
> + * and CPU class bits.
> + */
> + if (omap3_has_iva() && omap3_has_sgx()) {
> + strcpy(cpu_name, "3430/3530");
> + }
> + else if (omap3_has_sgx()) {
> + omap_revision = OMAP3525_REV (rev);
> + strcpy(cpu_name, "3525");
> + }
> + else if (omap3_has_iva()) {
> + omap_revision = OMAP3515_REV (rev);
> + strcpy(cpu_name, "3515");
> + }
> + else {
> + omap_revision = OMAP3503_REV (rev);
> + strcpy(cpu_name, "3503");
> + }
Please remove the spaces in the *_REV(rev) macro calls above.
> +
> + switch (rev) {
> + case 0x10:
> + strcpy(cpu_rev, "2.0");
> + break;
> + case 0x20:
> + strcpy(cpu_rev, "2.1");
> + break;
> + case 0x30:
> + strcpy(cpu_rev, "3.0");
> + break;
> + case 0x40:
> + strcpy(cpu_rev, "3.1");
> + break;
> + default:
> + /* Use the latest known revision as default */
> + strcpy(cpu_rev, "3.1");
> + }
I believe the above should use the defines to avoid thing
breaking if renumbering the defines?
case 0x10 should be case CHIP_IS_OMAP3430ES2
case 0x20 should be case CHIP_IS_OMAP3430ES3
...
But instead you're renaming the defined ES values so what we
have defined is different from your naming?
Can you please check that, and also boot on various boards
to confirm. I suspect the TI documentation is messed up for
the ES numbering..
Other than that, let's plan on merging this too after
2.6.32-rc1.
Regards,
Tony
> +
> + /*
> + * Print verbose information
> + */
> + pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev);
> +
> OMAP3_SHOW_FEATURE(l2cache);
> OMAP3_SHOW_FEATURE(iva);
> OMAP3_SHOW_FEATURE(sgx);
> diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
> index 4a04f77..a0dbbb4 100644
> --- a/arch/arm/plat-omap/include/mach/cpu.h
> +++ b/arch/arm/plat-omap/include/mach/cpu.h
> @@ -57,6 +57,11 @@ struct omap_chip_id {
> unsigned int omap_rev(void);
>
> /*
> + * Get the CPU revision for OMAP devices
> + */
> +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
> +
> +/*
> * Test if multicore OMAP support is needed
> */
> #undef MULTI_OMAP1
> @@ -360,7 +365,21 @@ IS_OMAP_TYPE(3430, 0x3430)
>
> #if defined(CONFIG_ARCH_OMAP34XX)
> # undef cpu_is_omap3430
> +# undef cpu_is_omap3503
> +# undef cpu_is_omap3515
> +# undef cpu_is_omap3525
> +# undef cpu_is_omap3530
> # define cpu_is_omap3430() is_omap3430()
> +# define cpu_is_omap3503 (cpu_is_omap3430() & \
> + (!omap3_has_iva()) & \
> + (!omap3_has_sgx()))
> +# define cpu_is_omap3515 (cpu_is_omap3430() & \
> + (omap3_has_iva()) & \
> + (!omap3_has_sgx()))
> +# define cpu_is_omap3525 (cpu_is_omap3430() & \
> + (omap3_has_sgx()) & \
> + (!omap3_has_iva()))
> +# define cpu_is_omap3530 (cpu_is_omap3430())
> #endif
>
> # if defined(CONFIG_ARCH_OMAP4)
> @@ -391,6 +410,12 @@ IS_OMAP_TYPE(3430, 0x3430)
> #define OMAP3430_REV_ES3_0 0x34303034
> #define OMAP3430_REV_ES3_1 0x34304034
>
> +#define OMAP35XX_CLASS 0x35000034
> +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12))
> +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12))
> +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12))
> +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12))
> +
> #define OMAP443X_CLASS 0x44300034
>
> /*
> --
> 1.6.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
