Hi Eric & Felipe,
* Eric Witcher <ewitcher@xxxxxxxxxxxxxx> [090825 20:20]:
>
> -----Original Message-----
> >From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
> >Sent: Aug 19, 2009 9:40 AM
> >To: ext Tony Lindgren <tony@xxxxxxxxxxx>
> >Cc: Eric Witcher <ewitcher@xxxxxxxxxxxxxx>, "linux-omap@xxxxxxxxxxxxxxx" <linux-omap@xxxxxxxxxxxxxxx>
> >Subject: Re: [PATCH 10/10] OMAP3: update OMAP3 Beagle defconfig, v3
> >
> >Hi,
> >
> >On Sun, Aug 16, 2009 at 05:42:00PM +0200, ext Tony Lindgren wrote:
> >> From f9356c9b5ca663feb3a985b42d0409da5625d537 Mon Sep 17 00:00:00 2001
> >> From: Paul Walmsley <paul@xxxxxxxxx>
> >> Date: Sun, 16 Aug 2009 18:29:49 +0300
> >> Subject: [PATCH] OMAP3: update OMAP3 Beagle defconfig
> >>
> >> Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
> >> Beagle can again use MMC rootfs after this patch. Tested on BeagleBoard
> >> rev C2.
> >>
> >> Patch updated to enable PM and OTG options as suggested by
> >> Eric Witcher <ewitcher@xxxxxxxxxxxxxx>.
> >>
> >> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> >> Cc: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
> >> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> >
> >Acked-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
> >
> >now that we have REGULATOR and TWL4030_USB it will work.
Updated the patch with Felipe's Ack. Then see below on how
we should deal with the remaining parts.
> >
> Hi everyone,
>
> I just tested this again at the top of for-next at
> 6e083649e19ba4aa3b8a65d75f394ab8a06feb78
> and we are still short 2 changes in order to get a working
> boot using omap3_beagle_defconfig.
>
> The changes are shown below.
>
> The code deltas were discussed before
> but I didn't follow how the twl4030-usb.c change was going to make
> it into the tree.
>
> With respect to the .config change, it was shown in my earlier post
> but it didn't get put into the commit at
> OMAP3: update OMAP3 Beagle defconfig
> af9d536a65251a547864e3be87f53a22a6966b7a
>
> In that check-in configuration CONFIG_USB_M66592 overrides
> CONFIG_USB_GADGET_MUSB_HDRC and we fail during compile.
>
> Eric
>
> ---
> arch/arm/configs/omap3_beagle_defconfig | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
> index b213e3b..51c0fa8 100644
> --- a/arch/arm/configs/omap3_beagle_defconfig
> +++ b/arch/arm/configs/omap3_beagle_defconfig
> @@ -899,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
> # CONFIG_USB_GADGET_FSL_USB2 is not set
> # CONFIG_USB_GADGET_NET2280 is not set
> # CONFIG_USB_GADGET_PXA25X is not set
> -CONFIG_USB_GADGET_M66592=y
> -CONFIG_USB_M66592=y
> +# CONFIG_USB_GADGET_M66592 is not set
> +# CONFIG_USB_M66592 is not set
> # CONFIG_USB_GADGET_PXA27X is not set
> # CONFIG_USB_GADGET_GOKU is not set
> # CONFIG_USB_GADGET_LH7A40X is not set
Thanks, merged this part into the patch.
> --
> 1.6.2.2
>
> ---
> arch/arm/mach-omap2/serial.c | 1 -
> drivers/usb/otg/twl4030-usb.c | 2 +-
> 2 files changed, 1 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index 021130d..1cf8078 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -475,7 +475,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
> uart->padconf = 0;
> }
>
> - p->irqflags |= IRQF_SHARED;
> ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
> "serial idle", (void *)uart);
> WARN_ON(ret);
The related serial irqflags changes are already queued up in for-next,
so this we can ignore until the omap for-next is merged.
> diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
> index 9e3e7a5..d1852d4 100644
> --- a/drivers/usb/otg/twl4030-usb.c
> +++ b/drivers/usb/otg/twl4030-usb.c
> @@ -774,7 +774,7 @@ static int __init twl4030_usb_init(void)
> {
> return platform_driver_register(&twl4030_usb_driver);
> }
> -subsys_initcall(twl4030_usb_init);
> +subsys_initcall_sync(twl4030_usb_init);
>
> static void __exit twl4030_usb_exit(void)
> {
But this should be a separate patch and Felipe should take a look at it.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
