* Shilimkar, Santosh <santosh.shilimkar@xxxxxx> [090820 16:13]: > (Resending with a correction) > > > -----Original Message----- > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Shilimkar, Santosh > > Sent: Thursday, August 20, 2009 6:33 PM > > To: Tony Lindgren; Stephen Rothwell > > Cc: linux-omap@xxxxxxxxxxxxxxx; linux-next@xxxxxxxxxxxxxxx; linux- > > kernel@xxxxxxxxxxxxxxx; Syed, Rafiuddin; Russell King; Kalle Valo > > Subject: RE: linux-next: manual merge of the omap tree with the arm tree > > > > > > Today's linux-next merge of the omap tree got a conflict in > > > > arch/arm/mach-omap2/board-4430sdp.c between commit > > > > 085b54d99b8ee999e7905b8f16e201e0da8ba369 ("ARM: OMAP4: Add UART4 > > > > support") from the arm tree and commit > > > > 4c29fa3e47342666e12e46f35f40dd90b12cd1a4 ("OMAP: remove > > OMAP_TAG_UART") > > > > from the omap tree. > > > > > > > > Just context changes (I think). I fixed it up (see below) and can > > carry > > > > the fix as necessary. > > > > > > Thanks yeh the fix looks right. I'll take a look if I can squeeze > > > something > > > like that into my queue so the merge conflict disappears. > > > > There is another issue with the same merge I noticed which not seems to be > > correct. > > http://git.kernel.org/?p=linux/kernel/git/sfr/linux- > > next.git;a=commit;h=a11128de5baf523cf73176170659902fe1335527 > > > > < Code snippet > > > > > 102 static struct plat_serial8250_port serial_platform_data2[] = { > > 103 { > > 104 .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), > > 105 .mapbase = OMAP_UART3_BASE, > > 106 .irq = 74, > > 107 .flags = UPF_BOOT_AUTOCONF, > > 108 .iotype = UPIO_MEM, > > 109 .regshift = 2, > > 110 .uartclk = OMAP24XX_BASE_BAUD * 16, > > 111 }, { > > 112 #ifdef CONFIG_ARCH_OMAP4 > > 113 .membase = IO_ADDRESS(OMAP_UART4_BASE), > > 114 .mapbase = OMAP_UART4_BASE, > > 115 .irq = 70, > > 116 .flags = UPF_BOOT_AUTOCONF, > > 117 .iotype = UPIO_MEM, > > 118 .regshift = 2, > > 119 .uartclk = OMAP24XX_BASE_BAUD * 16, > > 120 }, { > > 121 #endif > > 122 .flags = 0 > > 123 } > > 124 }; > > > > This patch (ARM: OMAP4: Add UART4) was generated when there was single > > structure holding all three UARTs and fourth UART was added accordingly. > > And now it's been merged with serial.c which has UART's structures > > separated already. > > Below patch fixes the same but don't know what is the way to get merged in > > such cases. > > > > Tony, > > Could you please review it? Looks OK, except the OMAP_IO_ADDRESS() has been split to OMAP1_IO_ADDRESS() and OMAP2_IO_ADDRESS in omap for-next tree. Regards, Tony > > From c8be9f1b5d4fe1dce06b6f33be33fe57f376ea7f Mon Sep 17 00:00:00 2001 > From: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > Date: Thu, 20 Aug 2009 18:33:43 +0530 > Subject: [PATCH] OMAP4: UART4 : Reworked patch to fix merge conflicts. > > This patch adds UART4 support on OMAP4430 development platform. > The serial omap patches has split the UART platform > data into separate structure hence needs rework. > > Without this patch omap_serial_init() would produce kernel crash > on OMAP4430 platform while looping for the 4 th UART platform > data. > > Signed-off-by: Syed Rafiuddin <rafiuddin.syed@xxxxxx> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > --- > arch/arm/mach-omap2/board-4430sdp.c | 2 +- > arch/arm/mach-omap2/serial.c | 27 ++++++++++++++++++++++++++- > 2 files changed, 27 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c > index b0c7402..1b22307 100644 > --- a/arch/arm/mach-omap2/board-4430sdp.c > +++ b/arch/arm/mach-omap2/board-4430sdp.c > @@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { > }; > > static struct omap_uart_config sdp4430_uart_config __initdata = { > - .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), > + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), > }; > > static struct omap_lcd_config sdp4430_lcd_config __initdata = { > diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c > index a7421a5..b96cac4 100644 > --- a/arch/arm/mach-omap2/serial.c > +++ b/arch/arm/mach-omap2/serial.c > @@ -112,7 +112,21 @@ static struct plat_serial8250_port serial_platform_data2[] = { > .flags = 0 > } > }; > - > +#ifdef CONFIG_ARCH_OMAP4 > +static struct plat_serial8250_port serial_platform_data3[] = { > + { > + .membase = IO_ADDRESS(OMAP_UART4_BASE), > + .mapbase = OMAP_UART4_BASE, > + .irq = 70, > + .flags = UPF_BOOT_AUTOCONF, > + .iotype = UPIO_MEM, > + .regshift = 2, > + .uartclk = OMAP24XX_BASE_BAUD * 16, > + }, { > + .flags = 0 > + } > +}; > +#endif > static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, > int offset) > { > @@ -550,6 +564,17 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { > }, > }, > }, > +#ifdef CONFIG_ARCH_OMAP4 > + { > + .pdev = { > + .name = "serial8250", > + .id = PLAT8250_DEV_PLATFORM2, > + .dev = { > + .platform_data = serial_platform_data3, > + }, > + }, > + }, > +#endif > }; > > void __init omap_serial_init(void) > -- > 1.5.4.7 > > Regards, > Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
