> On Fri, Jan 24, 2025 at 07:10:50PM +0530, Basharath Hussain Khaja wrote: >> From: Roger Quadros <rogerq@xxxxxx> >> >> Changes corresponding to link configuration such as speed and duplexity. >> IRQ and handler initializations are performed for packet reception.Firmware >> receives the packet from the wire and stores it into OCMC queue. Next, it >> notifies the CPU via interrupt. Upon receiving the interrupt CPU will >> service the IRQ and packet will be processed by pushing the newly allocated >> SKB to upper layers. >> >> When the user application want to transmit a packet, it will invoke >> sys_send() which will inturn invoke the PRUETH driver, then it will write >> the packet into OCMC queues. PRU firmware will pick up the packet and >> transmit it on to the wire. >> >> Signed-off-by: Roger Quadros <rogerq@xxxxxx> >> Signed-off-by: Andrew F. Davis <afd@xxxxxx> >> Signed-off-by: Parvathi Pudi <parvathi@xxxxxxxxxxx> >> Signed-off-by: Basharath Hussain Khaja <basharath@xxxxxxxxxxx> >> --- >> drivers/net/ethernet/ti/icssm/icssm_prueth.c | 599 ++++++++++++++++++- >> drivers/net/ethernet/ti/icssm/icssm_prueth.h | 46 ++ >> 2 files changed, 640 insertions(+), 5 deletions(-) > > Looks like this patch was duplicated and posted twice ? When I posted the patch first time I received a bounce back error. So I was not sure if the patch got posted successfully or not so I have to re-sent. Sorry for the confusion. Thanks & Best Regards, Basharath.
