Hi Robert, On Wed, Oct 30, 2024 at 4:00 PM Robert Nelson <robertcnelson@xxxxxxxxx> wrote: > On Tue, Oct 29, 2024 at 12:18 PM Geert Uytterhoeven > <geert@xxxxxxxxxxxxxx> wrote: > > During the last few months, booting kernels on BeagleBone Black > > sometimes fails with: > What revision of the board do you have, Bx, Cx, etc. This particular one is a C3. > Only C3 has the new PCB with the phy 'reset' gpio line. Indeed. > https://openbeagle.org/beagleboard/beaglebone-black/-/blob/master/BBB_SCH.pdf?ref_type=heads > > For pre-C3 boards, removing "C24" has fixed a large percentage of my > boards in my ci test farm, while it's not a perfect fix as some still > fail.. Yeah, C24 affects reset delay, too. But Rev. C3 does not have it mounted. My Rev. C (no known issues) should have it, and Rev. A5C (the one that sometimes needs a manual reset after power-up) has only 1µF instead of 2.2µF. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
