Implementations of struct lcd_ops.set_mode only require the resolution
from struct fb_videomode. Pass the xres and yres fields, but remove the
dependency on the fbdev data structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
drivers/video/backlight/corgi_lcd.c | 5 ++---
drivers/video/backlight/lcd.c | 4 +++-
drivers/video/backlight/tdo24m.c | 5 ++---
include/linux/lcd.h | 7 +++++--
4 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index 35c3fd3281ca..69f49371ea35 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
-#include <linux/fb.h>
#include <linux/lcd.h>
#include <linux/spi/spi.h>
#include <linux/spi/corgi_lcd.h>
@@ -332,12 +331,12 @@ static void corgi_lcd_power_off(struct corgi_lcd *lcd)
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
}
-static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+static int corgi_lcd_set_mode(struct lcd_device *ld, u32 xres, u32 yres)
{
struct corgi_lcd *lcd = lcd_get_data(ld);
int mode = CORGI_LCD_MODE_QVGA;
- if (m->xres == 640 || m->xres == 480)
+ if (xres == 640 || xres == 480)
mode = CORGI_LCD_MODE_VGA;
if (lcd->mode == mode)
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 269ca9061df4..ed2095d54df9 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -66,8 +66,10 @@ static int fb_notifier_callback(struct notifier_block *self,
if (ld->ops->set_power)
ld->ops->set_power(ld, power);
} else {
+ const struct fb_videomode *videomode = evdata->data;
+
if (ld->ops->set_mode)
- ld->ops->set_mode(ld, evdata->data);
+ ld->ops->set_mode(ld, videomode->xres, videomode->yres);
}
out:
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index a14a94114e9d..c04ee3d04d87 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -12,7 +12,6 @@
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
-#include <linux/fb.h>
#include <linux/lcd.h>
#include <linux/slab.h>
@@ -308,12 +307,12 @@ static int tdo24m_get_power(struct lcd_device *ld)
return lcd->power;
}
-static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+static int tdo24m_set_mode(struct lcd_device *ld, u32 xres, u32 yres)
{
struct tdo24m *lcd = lcd_get_data(ld);
int mode = MODE_QVGA;
- if (m->xres == 640 || m->xres == 480)
+ if (xres == 640 || xres == 480)
mode = MODE_VGA;
if (lcd->mode == mode)
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 8399b5ed48f2..59a80b396a71 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -51,8 +51,11 @@ struct lcd_ops {
int (*get_contrast)(struct lcd_device *);
/* Set LCD panel contrast */
int (*set_contrast)(struct lcd_device *, int contrast);
- /* Set LCD panel mode (resolutions ...) */
- int (*set_mode)(struct lcd_device *, struct fb_videomode *);
+
+ /*
+ * Set LCD panel mode (resolutions ...)
+ */
+ int (*set_mode)(struct lcd_device *lcd, u32 xres, u32 yres);
/*
* Check if the LCD controls the given display device. This
--
2.46.0
