From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
---
drivers/pci/controller/cadence/pci-j721e.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 98484f001562..9af4fd64c1f9 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -52,6 +52,7 @@ struct j721e_pcie {
u32 mode;
u32 num_lanes;
u32 max_lanes;
+ struct gpio_desc *reset_gpio;
void __iomem *user_cfg_base;
void __iomem *intd_cfg_base;
u32 linkdown_irq_regfield;
@@ -508,6 +509,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
goto err_get_sync;
}
+ pcie->reset_gpio = gpiod;
ret = cdns_pcie_init_phy(dev, cdns_pcie);
if (ret) {
--
2.39.2
