Re: [PATCH v4 4/5] PCI: imx6: Convert to agnostic GPIO API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thu, May 09, 2024 at 01:24:45AM +0000, Hongxing Zhu kirjoitti:
> > -----Original Message-----
> > From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Sent: 2024年5月6日 22:21

...

> > -	imx6_pcie->gpio_active_high = of_property_read_bool(node,
> > -						"reset-gpio-active-high");
> > -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> > -		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> > -				imx6_pcie->gpio_active_high ?
> > -					GPIOF_OUT_INIT_HIGH :
> > -					GPIOF_OUT_INIT_LOW,
> > -				"PCIe reset");
> > -		if (ret) {
> > -			dev_err(dev, "unable to get reset gpio\n");
> > -			return ret;
> > -		}
> > -	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> > -		return imx6_pcie->reset_gpio;
> > -	}

> Please correct me if my understand is wrong.
> The "reset-gpio-active-high" property is added for some buggy board designs.
> On these buggy boards, the reset gpio is active high.

This is my understanding too.

> In the other words, the PERST# is active and remote endpoint device would
> be in reset stat when this gpio is high on these buggy boards.

Yes.

> I'm afraid that the PCIe would be broken on these boards, If these codes
>  are removed totally,

No. Linus W. explained in the previous version review round how it's supposed
to work.

> and toggle the reset GPIO pin like below.
> ...
> gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
> msleep(100);
> gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
> ...

It's not the code that this patch adds. I'm not sure if I understand starting
from here what you mean.

> By the way, this reset GPIO pin should be high at end in
> imx6_pcie_deassert_core_reset() if the imx6_pcie->gpio_active_high is zero. 

This seems a terminology mixup. You probably meant "inactive".
And this is exactly the case with this patch.

If you start thinking in terms of "active"/"inactive" you will see that there
is no contradiction and no behaviour change. The quirk itself is located in
gpiolib-of.c..

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux