Convert the legacy txt binding to modern YAML.
There are a couple of semantic changes:
- hsi-port@<addr> and ssi-port@<addr> node name
changed to port@<addr>
- ti,hwmods was marked as deprecated. This is supposed to go away
once OMAP3 gets the same treatment as OMAP4.
- changed ti,cawake-gpio to ti,cawake-gpios
- describe peripheral requirements for the port node
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/hsi/omap-ssi.txt | 102 ------------
.../devicetree/bindings/hsi/ti,omap-ssi.yaml | 177 +++++++++++++++++++++
2 files changed, 177 insertions(+), 102 deletions(-)
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
deleted file mode 100644
index 77a0c3c3036e..000000000000
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-OMAP SSI controller bindings
-
-OMAP3's Synchronous Serial Interface (SSI) controller implements a
-legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
-while the controller found inside OMAP4 is supposed to be fully compliant
-with the HSI standard.
-
-Required properties:
-- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi"
-- reg-names: Contains the values "sys" and "gdd" (in this order).
-- reg: Contains a matching register specifier for each entry
- in reg-names.
-- interrupt-names: Contains the value "gdd_mpu".
-- interrupts: Contains matching interrupt information for each entry
- in interrupt-names.
-- ranges: Represents the bus address mapping between the main
- controller node and the child nodes below.
-- clock-names: Must include the following entries:
- "ssi_ssr_fck": The OMAP clock of that name
- "ssi_sst_fck": The OMAP clock of that name
- "ssi_ick": The OMAP clock of that name
-- clocks: Contains a matching clock specifier for each entry in
- clock-names.
-- #address-cells: Should be set to <1>
-- #size-cells: Should be set to <1>
-
-Each port is represented as a sub-node of the ti,omap3-ssi device.
-
-Required Port sub-node properties:
-- compatible: Should be set to the following value
- ti,omap3-ssi-port (applicable to OMAP34xx devices)
- ti,omap4-hsi-port (applicable to OMAP44xx devices)
-- reg-names: Contains the values "tx" and "rx" (in this order).
-- reg: Contains a matching register specifier for each entry
- in reg-names.
-- interrupts: Should contain interrupt specifiers for mpu interrupts
- 0 and 1 (in this order).
-- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
- events for the port. This is an optional board-specific
- property. If it's missing the port will not be
- enabled.
-
-Optional properties:
-- ti,hwmods: Shall contain TI interconnect module name if needed
- by the SoC
-
-Example for Nokia N900:
-
-ssi-controller@48058000 {
- compatible = "ti,omap3-ssi";
-
- /* needed until hwmod is updated to use the compatible string */
- ti,hwmods = "ssi";
-
- reg = <0x48058000 0x1000>,
- <0x48059000 0x1000>;
- reg-names = "sys",
- "gdd";
-
- interrupts = <55>;
- interrupt-names = "gdd_mpu";
-
- clocks = <&ssi_ssr_fck>,
- <&ssi_sst_fck>,
- <&ssi_ick>;
- clock-names = "ssi_ssr_fck",
- "ssi_sst_fck",
- "ssi_ick";
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- ssi-port@4805a000 {
- compatible = "ti,omap3-ssi-port";
-
- reg = <0x4805a000 0x800>,
- <0x4805a800 0x800>;
- reg-names = "tx",
- "rx";
-
- interrupt-parent = <&intc>;
- interrupts = <67>,
- <68>;
-
- ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
- }
-
- ssi-port@4805a000 {
- compatible = "ti,omap3-ssi-port";
-
- reg = <0x4805b000 0x800>,
- <0x4805b800 0x800>;
- reg-names = "tx",
- "rx";
-
- interrupt-parent = <&intc>;
- interrupts = <69>,
- <70>;
-
- }
-}
diff --git a/Documentation/devicetree/bindings/hsi/ti,omap-ssi.yaml b/Documentation/devicetree/bindings/hsi/ti,omap-ssi.yaml
new file mode 100644
index 000000000000..433e2b2c36ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/ti,omap-ssi.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hsi/ti,omap-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SSI Controller on OMAP SoCs
+
+description:
+ OMAP3's Synchronous Serial Interface (SSI) controller implements a
+ legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+ while the controller found inside OMAP4 is supposed to be fully compliant
+ with the HSI standard.
+
+maintainers:
+ - Sebastian Reichel <sre@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - ti,omap3-ssi
+ - ti,omap4-hsi
+
+ reg:
+ items:
+ - description: registers for sys
+ - description: registers for gdd
+
+ reg-names:
+ items:
+ - const: sys
+ - const: gdd
+
+ ranges: true
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: gdd_mpu
+
+ ti,hwmods:
+ const: ssi
+ deprecated: true
+
+patternProperties:
+ "port@[0-9a-f]+":
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - ti,omap3-ssi-port
+ - ti,omap4-hsi-port
+
+ reg:
+ items:
+ - description: TX registers
+ - description: RX registers
+
+ reg-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ items:
+ - description: MPU interrupt 0
+ - description: MPU interrupt 1
+ minItems: 1
+
+ ti,ssi-cawake-gpios:
+ description: GPIO signifying CAWAKE events
+ maxItems: 1
+
+ patternProperties:
+ "^(modem|mcu)$":
+ type: object
+ $ref: /schemas/hsi/hsi-client.yaml#
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,omap3-ssi
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ items:
+ - const: ssi_ssr_fck
+ - const: ssi_sst_fck
+ - const: ssi_ick
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: hsi_fck
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys", "gdd";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+ interrupts = <55>;
+ interrupt-names = "gdd_mpu";
+
+ port@4805a000 {
+ compatible = "ti,omap3-ssi-port";
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ interrupts = <67>, <68>;
+ ti,ssi-cawake-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ port@4805b000 {
+ compatible = "ti,omap3-ssi-port";
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ interrupts = <69>, <70>;
+ };
+ };
--
2.43.0
