Add board file for Nokia N800 and N810 devices. Currently only serial ports,
onenand, spi and usb are configured, more to come later.
Tested on Nokia N800.
Signed-off-by: Kalle Valo <kalle.valo@xxxxxx>
---
arch/arm/mach-omap2/Kconfig | 4 +
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/board-n8x0.c | 155 ++++++++++++++++++++++++++++++++++++++
3 files changed, 160 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-n8x0.c
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bf54686..75b1c7e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,6 +73,10 @@ config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_NOKIA_N8X0
+ bool "Nokia N800/N810"
+ depends on ARCH_OMAP2420
+
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 757c84b..8850a24 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -62,7 +62,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
mmc-twl4030.o
-
+obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
new file mode 100644
index 0000000..813b57d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -0,0 +1,155 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+ *
+ * Copyright (C) 2005-2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@xxxxxxxxx>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/stddef.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/musb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/mcspi.h>
+#include <mach/onenand.h>
+#include <mach/serial.h>
+
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+ {
+ .modalias = "p54spi",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .controller_data = &p54spi_mcspi_config,
+ },
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 0x20000,
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x60000,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "initfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x400000,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 26,
+ .parts = onenand_partitions,
+ .nr_parts = ARRAY_SIZE(onenand_partitions),
+ .flags = ONENAND_SYNC_READ,
+};
+
+static void __init n8x0_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static void __init n8x0_onenand_init(void) {}
+
+#endif
+
+/* FIXME: n810 needs UART1 */
+static struct omap_uart_platform_data n8x0_uart_config __initdata = {
+ .enabled_uarts = (1 << 2),
+};
+
+static void __init n8x0_map_io(void)
+{
+ omap2_set_globals_242x();
+ omap2_map_common_io();
+}
+
+static void __init n8x0_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static void __init n8x0_init_machine(void)
+{
+ /* FIXME: add n810 spi devices */
+ spi_register_board_info(n800_spi_board_info,
+ ARRAY_SIZE(n800_spi_board_info));
+
+ omap_serial_init(&n8x0_uart_config);
+ n8x0_onenand_init();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+ .init_machine = n8x0_init_machine,
+ .timer = &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810, "Nokia N810")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+ .init_machine = n8x0_init_machine,
+ .timer = &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+ .init_machine = n8x0_init_machine,
+ .timer = &omap_timer,
+MACHINE_END
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
