Hi Tony!
On Fri, 2024-03-08 at 09:35 +0200, Tony Lindgren wrote:
> Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
> added a new kerneldoc warning as the function name changed:
>
> warning: expecting prototype for am33xx_prm_global_warm_sw_reset().
> Prototype was for am33xx_prm_global_sw_reset() instead
>
> Turns out prm33xx.c produces a few other kerneldoc warnings so let's
> fix them all.
>
> Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
> Cc: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxxxx>
> Cc: Matthias Michel <matthias.michel@xxxxxxxxxxx>
> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
My bad! Thanks for fixing this!
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
> --- a/arch/arm/mach-omap2/prm33xx.c
> +++ b/arch/arm/mach-omap2/prm33xx.c
> @@ -48,8 +48,7 @@ static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
> * @part: PRM partition, ignored for AM33xx
> * @inst: CM instance register offset (*_INST macro)
> * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> - *
> - * Returns 1 if the (sub)module hardreset line is currently asserted,
> + * @return: 1 if the (sub)module hardreset line is currently asserted,
> * 0 if the (sub)module hardreset line is not currently asserted, or
> * -EINVAL upon parameter error.
> */
> @@ -70,14 +69,14 @@ static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
> * @shift: register bit shift corresponding to the reset line to assert
> * @part: CM partition, ignored for AM33xx
> * @inst: CM instance register offset (*_INST macro)
> - * @rstctrl_reg: RM_RSTCTRL register address for this module
> + * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> + * @return: Returns 0 upon success or -EINVAL upon an argument error
> *
> * Some IPs like dsp, ipu or iva contain processors that require an HW
> * reset line to be asserted / deasserted in order to fully enable the
> * IP. These modules may have multiple hard-reset lines that reset
> * different 'submodules' inside the IP block. This function will
> - * place the submodule into reset. Returns 0 upon success or -EINVAL
> - * upon an argument error.
> + * place the submodule into reset.
> */
> static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
> u16 rstctrl_offs)
> @@ -96,17 +95,18 @@ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
> * @st_shift: reset status register bit shift corresponding to the reset line
> * @part: PRM partition, not used for AM33xx
> * @inst: CM instance register offset (*_INST macro)
> - * @rstctrl_reg: RM_RSTCTRL register address for this module
> - * @rstst_reg: RM_RSTST register address for this module
> + * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> + * @rstst_offs: RM_RSTST register address offset for this module
> + * @return: Returns 0 upon success or -EINVAL upon an argument error,
> + * -EEXIST if the submodule was already out of reset, or -EBUSY if the
> + * submodule did not exit reset promptly
> *
> * Some IPs like dsp, ipu or iva contain processors that require an HW
> * reset line to be asserted / deasserted in order to fully enable the
> * IP. These modules may have multiple hard-reset lines that reset
> * different 'submodules' inside the IP block. This function will
> * take the submodule out of reset and wait until the PRCM indicates
> - * that the reset has completed before returning. Returns 0 upon success or
> - * -EINVAL upon an argument error, -EEXIST if the submodule was already out
> - * of reset, or -EBUSY if the submodule did not exit reset promptly.
> + * that the reset has completed before returning.
> */
> static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
> s16 inst, u16 rstctrl_offs,
> @@ -315,7 +315,7 @@ static int am33xx_check_vcvp(void)
> }
>
> /**
> - * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
> + * am33xx_prm_global_sw_reset - reboot the device via warm reset
> *
> * Immediately reboots the device through warm reset.
> */
--
Alexander Sverdlin
Siemens AG
www.siemens.com
