Trying to append a second table for the same dev_id doesn't seem to work.
The second table is just silently ignored. As a result eMMC GPIOs are not
present.
Fix by using separate tables for N800 and N810.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
arch/arm/mach-omap2/board-n8x0.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3e48f34016c1..c933a91751e4 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -140,7 +140,7 @@ static int slot1_cover_open;
static int slot2_cover_open;
static struct device *mmc_device;
-static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
.dev_id = "mmci-omap.0",
.table = {
/* Slot switch, GPIO 96 */
@@ -152,6 +152,8 @@ static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
.dev_id = "mmci-omap.0",
.table = {
+ /* Slot switch, GPIO 96 */
+ GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
/* Slot index 1, VSD power, GPIO 23 */
GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
/* Slot index 1, VIO power, GPIO 9 */
@@ -412,8 +414,6 @@ static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
static void __init n8x0_mmc_init(void)
{
- gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
-
if (board_is_n810()) {
mmc1_data.slots[0].name = "external";
@@ -426,6 +426,8 @@ static void __init n8x0_mmc_init(void)
mmc1_data.slots[1].name = "internal";
mmc1_data.slots[1].ban_openended = 1;
gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+ } else {
+ gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
}
mmc1_data.nr_slots = 2;
--
2.39.2
