The GPIO bank width is 32 on OMAP2, so all labels are incorrect.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
arch/arm/mach-omap2/board-n8x0.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 31755a378c73..3e48f34016c1 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -144,8 +144,7 @@ static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
.dev_id = "mmci-omap.0",
.table = {
/* Slot switch, GPIO 96 */
- GPIO_LOOKUP("gpio-80-111", 16,
- "switch", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
{ }
},
};
@@ -154,11 +153,9 @@ static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
.dev_id = "mmci-omap.0",
.table = {
/* Slot index 1, VSD power, GPIO 23 */
- GPIO_LOOKUP_IDX("gpio-16-31", 7,
- "vsd", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
/* Slot index 1, VIO power, GPIO 9 */
- GPIO_LOOKUP_IDX("gpio-0-15", 9,
- "vio", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
{ }
},
};
--
2.39.2
