"Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx> writes: > Kevin, > >> -----Original Message----- >> From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- >> owner@xxxxxxxxxxxxxxx] On Behalf Of Kevin Hilman >> Sent: Thursday, August 13, 2009 11:53 AM >> To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxxxxx; linux-arm@xxxxxxxxxxxxxxx >> Cc: linux-omap@xxxxxxxxxxxxxxx; Tero Kristo >> Subject: [PATCH 06/10] OMAP: PM debug: Add PRCM register dump support >> >> From: Tero Kristo <tero.kristo@xxxxxxxxx> >> >> Allows dumping out current register contents from the debug filesystem, >> and >> also allows user to add arbitrary register save points into code. Current >> register contents are available under debugfs at: >> >> [debugfs]/pm_debug/registers/current >> >> To add a save point, do following: >> >> From module init (or somewhere before the save call, called only once): >> pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n >> >> From arbitrary code location: >> pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n >> >> After this, the register dump can be seen under >> [debugfs]/pm_debug/registers/n >> >> Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxx> >> Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> >> --- >> arch/arm/mach-omap2/pm-debug.c | 208 >> ++++++++++++++++++++++++++++++++++++++++ >> arch/arm/mach-omap2/pm.h | 4 + >> 2 files changed, 212 insertions(+), 0 deletions(-) >> mode change 100644 => 100755 arch/arm/mach-omap2/pm-debug.c >> mode change 100644 => 100755 arch/arm/mach-omap2/pm.h > > I guess these 755 mode changes weren't intentional... :) Indeed, they were not. Thanks. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
