Re: [PATCH 11/14] phy: cadence-torrent: add suspend and resume support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,

On Mo, 2024-01-15 at 17:14 +0100, Thomas Richard wrote:
> Add suspend and resume support.
> The alread_configured flag is cleared during suspend stage to force the
> phy initialization during the resume stage.
> 
> Based on the work of Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> 
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> ---
>  drivers/phy/cadence/phy-cadence-torrent.c | 57 +++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
> index 70413fca5776..31b2594e5942 100644
> --- a/drivers/phy/cadence/phy-cadence-torrent.c
> +++ b/drivers/phy/cadence/phy-cadence-torrent.c
> @@ -3006,6 +3006,62 @@ static void cdns_torrent_phy_remove(struct platform_device *pdev)
[...]
> +static int cdns_torrent_phy_resume_noirq(struct device *dev)
> +{
> +	struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(dev);
> +	int node = cdns_phy->nsubnodes;
> +	int ret, i;
> +
> +	ret = cdns_torrent_clk(cdns_phy);
> +	if (ret)
> +		goto clk_cleanup;
> +
> +	/* Enable APB */
> +	reset_control_deassert(cdns_phy->apb_rst);
> +
> +	if (cdns_phy->nsubnodes > 1) {
> +		ret = cdns_torrent_phy_configure_multilink(cdns_phy);
> +		if (ret)
> +			goto put_lnk_rst;
> +	}
> +
> +	return 0;
> +
> +put_lnk_rst:
> +	for (i = 0; i < node; i++)
> +		reset_control_put(cdns_phy->phys[i].lnk_rst);

What is this intended to do? I expect this to explode in _remove, where
the lnk_rst are put again. Should this be:

		reset_control_assert(cdns_phy->phys[i].lnk_rst);

?


regards
Philipp





[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux