Fix spelling mistakes as reported by codespell.
Fix all kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
Cc: Keerthy <j-keerthy@xxxxxx>
Cc: linux-omap@xxxxxxxxxxxxxxx
Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++++-------
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 6 ++++--
2 files changed, 11 insertions(+), 9 deletions(-)
diff -- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -332,7 +332,7 @@ static inline int ti_bandgap_validate(st
* ti_bandgap_read_counter() - read the sensor counter
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: resulting update interval in miliseconds
+ * @interval: resulting update interval in milliseconds
*/
static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id,
int *interval)
@@ -352,7 +352,7 @@ static void ti_bandgap_read_counter(stru
* ti_bandgap_read_counter_delay() - read the sensor counter delay
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: resulting update interval in miliseconds
+ * @interval: resulting update interval in milliseconds
*/
static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id,
int *interval)
@@ -394,7 +394,7 @@ static void ti_bandgap_read_counter_dela
* ti_bandgap_read_update_interval() - read the sensor update interval
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: resulting update interval in miliseconds
+ * @interval: resulting update interval in milliseconds
*
* Return: 0 on success or the proper error code
*/
@@ -427,7 +427,7 @@ exit:
* ti_bandgap_write_counter_delay() - set the counter_delay
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: desired update interval in miliseconds
+ * @interval: desired update interval in milliseconds
*
* Return: 0 on success or the proper error code
*/
@@ -471,7 +471,7 @@ static int ti_bandgap_write_counter_dela
* ti_bandgap_write_counter() - set the bandgap sensor counter
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: desired update interval in miliseconds
+ * @interval: desired update interval in milliseconds
*/
static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id,
u32 interval)
@@ -486,7 +486,7 @@ static void ti_bandgap_write_counter(str
* ti_bandgap_write_update_interval() - set the update interval
* @bgp: pointer to bandgap instance
* @id: sensor id
- * @interval: desired update interval in miliseconds
+ * @interval: desired update interval in milliseconds
*
* Return: 0 on success or the proper error code
*/
@@ -871,7 +871,7 @@ static struct ti_bandgap *ti_bandgap_bui
}
/*
- * List of SoCs on which the CPU PM notifier can cause erros on the DTEMP
+ * List of SoCs on which the CPU PM notifier can cause errors on the DTEMP
* readout.
* Enabled notifier on these machines results in erroneous, random values which
* could trigger unexpected thermal shutdown.
diff -- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -189,8 +189,10 @@ struct temp_sensor_regval {
* @div_clk: pointer to divider clock of temperature sensor fclk
* @lock: spinlock for ti_bandgap structure
* @irq: MPU IRQ number for thermal alert
- * @tshut_gpio: GPIO where Tshut signal is routed
+ * @tshut_gpiod: GPIO where Tshut signal is routed
* @clk_rate: Holds current clock rate
+ * @nb: notifier block
+ * @is_suspended: set if the bandgap device is suspended
*
* The bandgap device structure representing the bandgap device instance.
* It holds most of the dynamic stuff. Configurations and sensor specific
@@ -276,7 +278,7 @@ struct ti_temp_sensor {
* TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features
* a history buffer of temperatures.
*
- * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
+ * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaround when the bandgap device
* has Errata 814
* TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
* inaccurate.
