The Motorola mapphone tablets are similar to the mapphone phones, but with
different display and without some phone related peripherals.
Let's add a new motorola-mapphone-mz607-mz617.dtsi and basic files for
xyboard mz609 and mz617. All the tablets from mz607 to mz617 are quite
similar so let's use motorola-mapphone-mz607-mz617.dtsi naming for the
common file.
Note that the tc358765 lcd bridge needs driver changes before it can be
added.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/ti/omap/Makefile | 4 +-
.../omap/motorola-mapphone-mz607-mz617.dtsi | 21 +++++++++
.../boot/dts/ti/omap/omap4-xyboard-mz609.dts | 46 +++++++++++++++++++
.../boot/dts/ti/omap/omap4-xyboard-mz617.dts | 17 +++++++
4 files changed, 87 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
- omap4-var-stk-om44.dtb
+ omap4-var-stk-om44.dtb \
+ omap4-xyboard-mz609.dtb \
+ omap4-xyboard-mz617.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
am335x-baltos-ir2110.dtb \
am335x-baltos-ir3220.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+ <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+ vmmc-supply = <&vsimcard>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ609";
+ compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ617";
+ compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+};
--
2.42.1
