From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
It adds a new sysfs file, where the user can configure the mcbsp mode to use.
If the mcbsp channel is in use, it does not allow the change.
Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode,
store it, than use it to implement the different modes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
---
arch/arm/plat-omap/include/mach/mcbsp.h | 8 +++
arch/arm/plat-omap/mcbsp.c | 84 +++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 51a6655..9b2b03e 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -255,6 +255,11 @@
/********************** McBSP SYSCONFIG bit definitions ********************/
#define SOFTRST 0x0002
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT 0
+#define MCBSP_DMA_MODE_THRESHOLD 1
+#define MCBSP_DMA_MODE_FRAME 2
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u16 spcr2;
@@ -385,6 +390,7 @@ struct omap_mcbsp {
struct clk *iclk;
struct clk *fclk;
#ifdef CONFIG_ARCH_OMAP34XX
+ int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
#endif
@@ -401,6 +407,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
#else
static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
{ }
@@ -408,6 +415,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
{ }
static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 13e7ce3..6a4a621 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -282,6 +282,29 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
return mcbsp->max_rx_thres;
}
EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ int dma_op_mode;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
#endif
/*
@@ -1063,9 +1086,65 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
THRESHOLD_PROP_BUILDER(max_tx_thres);
THRESHOLD_PROP_BUILDER(max_rx_thres);
+static ssize_t dma_op_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ int dma_op_mode;
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return sprintf(buf, "current mode: %d\n"
+ "possible mode values are:\n"
+ "%d - %s\n"
+ "%d - %s\n"
+ "%d - %s\n",
+ dma_op_mode,
+ MCBSP_DMA_MODE_ELEMENT, "element mode",
+ MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
+ MCBSP_DMA_MODE_FRAME, "frame mode");
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ unsigned long val;
+ int status;
+
+ status = strict_strtoul(buf, 0, &val);
+ if (status)
+ return status;
+
+ spin_lock_irq(&mcbsp->lock);
+
+ if (!mcbsp->free) {
+ size = -EBUSY;
+ goto unlock;
+ }
+
+ if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
+ size = -EINVAL;
+ goto unlock;
+ }
+
+ mcbsp->dma_op_mode = val;
+
+unlock:
+ spin_unlock_irq(&mcbsp->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
static const struct attribute *additional_attrs[] = {
&dev_attr_max_tx_thres.attr,
&dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
NULL,
};
@@ -1085,9 +1164,14 @@ static inline void __devexit omap_additional_remove(struct device *dev)
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
{
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
if (cpu_is_omap34xx()) {
mcbsp->max_tx_thres = max_thres(mcbsp);
mcbsp->max_rx_thres = max_thres(mcbsp);
+ /*
+ * REVISIT: Set dmap_op_mode to THRESHOLD as default
+ * for mcbsp2 instances.
+ */
if (omap_additional_add(mcbsp->dev))
dev_warn(mcbsp->dev,
"Unable to create additional controls\n");
--
1.6.2.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
