On 9/12/23 1:59 AM, Tony Lindgren wrote:
* Rob Herring <robh@xxxxxxxxxx> [230911 21:46]:
DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Note that I have no idea if this combination of overlays makes sense.
It does make sense, but it is only one of many valid combinations. I'm
guessing the goal here is just to make sure they all get applied in
at least one way so the scheme check runs. In that case this is fine
other than it might give the impression this is the only valid combinations.
Also now we end up with these odd `am57{1,2}x-idk-overlays.dtb` files
which also might confuse folks, I wonder if there is some way to
apply and check, but not ship/install these..
Andrew
Adding Andrew to review this.
Regards,
Tony
---
arch/arm/boot/dts/ti/omap/Makefile | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index d2b590004fed..d0c76d09fe70 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -129,6 +129,11 @@ dtb-$(CONFIG_SOC_AM43XX) += \
am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
+am571x-idk-overlays-dtbs := am571x-idk.dtb \
+ am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo
+am572x-idk-overlays-dtbs := am572x-idk.dtb \
+ am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo
+
dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
@@ -145,6 +150,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
am574x-idk.dtb \
am57xx-idk-lcd-osd101t2045.dtbo \
am57xx-idk-lcd-osd101t2587.dtbo \
+ am571x-idk-overlays.dtb \
+ am572x-idk-overlays.dtb \
dra7-evm.dtb \
dra72-evm.dtb \
dra72-evm-revc.dtb \
--
2.40.1
