On 07/09/2023 03:01, Adam Ford wrote:
> The pinmux for LED3 and LED4 are incorrectly attached to the
> omap3_pmx_core when they should be connected to the omap3_pmx_wkup
> pin mux. This was likely masked by the fact that the bootloader
> used to do all the pinmuxing.
>
> Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton")
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> This likely cannot apply to the original series, because the file has
> moved. I can generate a separate patch for the pre-move device trees
> if necesssary. The original location was:
> arch/arm/boot/dts/am3517-evm.dts
>
> diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> index af9df15274be..738189ddc8d5 100644
> --- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> +++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> @@ -271,13 +271,6 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
> >;
> };
>
> - leds_pins: leds-pins {
> - pinctrl-single,pins = <
> - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
> - OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
> - >;
> - };
> -
> mmc1_pins: mmc1-pins {
> pinctrl-single,pins = <
> OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
> @@ -355,3 +348,12 @@ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
> >;
> };
> };
> +
> +&omap3_pmx_wkup {
> + leds_pins: pinmux_leds_pins {
Come on... why moving it and changing the name to incorrect one? Isn't a
move cut-paste?
Best regards,
Krzysztof
