Remove the self-referenceing "pinctrl-0" entry inside the pinmux clause.
This eliminates the set of boot messages (one for each referenced pin)
similar to the following:
platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_P2_17_gpio
Signed-off-by: Trevor Woerner <twoerner@xxxxxxxxx>
---
arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
index 1c11245f6864..1e72b8382597 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
@@ -213,11 +213,6 @@ &am33xx_pinmux {
compatible = "pinconf-single";
pinctrl-names = "default";
- pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
- &P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
- &P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
- &P2_17_gpio >;
-
/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
P2_03_gpio: P2-03-gpio-pins {
pinctrl-single,pins = <
--
2.41.0.327.gaa9166bcc0ba
