On 07/08/2023 14:00, MD Danish Anwar wrote:
> From: Grygorii Strashko <grygorii.strashko@xxxxxx>
>
> For AM65x SR2.0 it's required to enable IEP1 in raw 64bit mode which is
> used by PRU FW to monitor the link and apply w/a for 10M link issue.
> Note. No public errata available yet.
>
> Without this w/a the PRU FW will stuck if link state changes under TX
> traffic pressure.
>
> Hence, add support for 10M full duplex for AM65x SR2.0:
> - add new IEP API to enable IEP, but without PTP support
> - add pdata quirk_10m_link_issue to enable 10M link issue w/a.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
> ---
> drivers/net/ethernet/ti/icssg/icss_iep.c | 26 ++++++++++++++++++++
> drivers/net/ethernet/ti/icssg/icss_iep.h | 2 ++
> drivers/net/ethernet/ti/icssg/icssg_config.c | 6 +++++
> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 17 +++++++++++--
> 4 files changed, 49 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c
> index 455c803dea36..527f17430f05 100644
> --- a/drivers/net/ethernet/ti/icssg/icss_iep.c
> +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c
> @@ -721,6 +721,32 @@ void icss_iep_put(struct icss_iep *iep)
> }
> EXPORT_SYMBOL_GPL(icss_iep_put);
>
> +void icss_iep_init_fw(struct icss_iep *iep)
> +{
> + /* start IEP for FW use in raw 64bit mode, no PTP support */
> + iep->clk_tick_time = iep->def_inc;
> + iep->cycle_time_ns = 0;
> + iep->ops = NULL;
> + iep->clockops_data = NULL;
> + icss_iep_set_default_inc(iep, iep->def_inc);
> + icss_iep_set_compensation_inc(iep, iep->def_inc);
> + icss_iep_set_compensation_count(iep, 0);
> + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, iep->refclk_freq / 10); /* 100 ms pulse */
> + regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0);
> + if (iep->plat_data->flags & ICSS_IEP_SLOW_COMPEN_REG_SUPPORT)
> + icss_iep_set_slow_compensation_count(iep, 0);
> +
> + icss_iep_enable(iep);
> + icss_iep_settime(iep, 0);
> +}
> +EXPORT_SYMBOL_GPL(icss_iep_init_fw);
> +
> +void icss_iep_exit_fw(struct icss_iep *iep)
> +{
> + icss_iep_disable(iep);
> +}
> +EXPORT_SYMBOL_GPL(icss_iep_exit_fw);
> +
> int icss_iep_init(struct icss_iep *iep, const struct icss_iep_clockops *clkops,
> void *clockops_data, u32 cycle_time_ns)
> {
> diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.h b/drivers/net/ethernet/ti/icssg/icss_iep.h
> index 9c7f4d0a0916..803a4b714893 100644
> --- a/drivers/net/ethernet/ti/icssg/icss_iep.h
> +++ b/drivers/net/ethernet/ti/icssg/icss_iep.h
> @@ -35,5 +35,7 @@ int icss_iep_exit(struct icss_iep *iep);
> int icss_iep_get_count_low(struct icss_iep *iep);
> int icss_iep_get_count_hi(struct icss_iep *iep);
> int icss_iep_get_ptp_clock_idx(struct icss_iep *iep);
> +void icss_iep_init_fw(struct icss_iep *iep);
> +void icss_iep_exit_fw(struct icss_iep *iep);
>
> #endif /* __NET_TI_ICSS_IEP_H */
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
> index ab648d3efe85..4c2b5d496670 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
> @@ -210,6 +210,9 @@ void icssg_config_ipg(struct prueth_emac *emac)
> case SPEED_100:
> icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
> break;
> + case SPEED_10:
> + icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
> + break;
> default:
> /* Other links speeds not supported */
> netdev_err(emac->ndev, "Unsupported link speed\n");
> @@ -440,6 +443,9 @@ void icssg_config_set_speed(struct prueth_emac *emac)
> case SPEED_100:
> fw_speed = FW_LINK_SPEED_100M;
> break;
> + case SPEED_10:
> + fw_speed = FW_LINK_SPEED_10M;
> + break;
> default:
> /* Other links speeds not supported */
> netdev_err(emac->ndev, "Unsupported link speed\n");
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> index b82a718fd602..216918162960 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> @@ -1131,7 +1131,6 @@ static int emac_phy_connect(struct prueth_emac *emac)
>
> /* remove unsupported modes */
> phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
> - phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
> phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
> phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
> phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Pause_BIT);
> @@ -2081,13 +2080,20 @@ static int prueth_probe(struct platform_device *pdev)
> goto free_pool;
> }
>
> + if (prueth->pdata.quirk_10m_link_issue) {
> + /* Enable IEP1 for FW in 64bit mode as W/A for 10M FD link detect issue under TX
> + * traffic.
> + */
> + icss_iep_init_fw(prueth->iep1);
This is the only place where IEP1 is used.
You should add all IEP1 related code in this patch.
> + }
> +
> /* setup netdev interfaces */
> if (eth0_node) {
> ret = prueth_netdev_init(prueth, eth0_node);
> if (ret) {
> dev_err_probe(dev, ret, "netdev init %s failed\n",
> eth0_node->name);
> - goto netdev_exit;
> + goto exit_iep;
> }
> prueth->emac[PRUETH_MAC0]->iep = prueth->iep0;
> }
> @@ -2158,6 +2164,10 @@ static int prueth_probe(struct platform_device *pdev)
> prueth_netdev_exit(prueth, eth_node);
> }
>
> +exit_iep:
> + if (prueth->pdata.quirk_10m_link_issue)
> + icss_iep_exit_fw(prueth->iep1);
> +
> free_pool:
> gen_pool_free(prueth->sram_pool,
> (unsigned long)prueth->msmcram.va, msmc_ram_size);
> @@ -2203,6 +2213,9 @@ static void prueth_remove(struct platform_device *pdev)
> prueth_netdev_exit(prueth, eth_node);
> }
>
> + if (prueth->pdata.quirk_10m_link_issue)
> + icss_iep_exit_fw(prueth->iep1);
> +
> icss_iep_put(prueth->iep1);
> icss_iep_put(prueth->iep0);
>
--
cheers,
-roger
