This series introduces Industrial Ethernet Peripheral (IEP) driver to support timestamping of ethernet packets and thus support PTP and PPS for PRU ICSSG ethernet ports. This series also adds 10M full duplex support for ICSSG ethernet driver. There are two IEP instances. IEP0 is used for packet timestamping while IEP1 is used for 10M full duplex support. This series is based on linux-next(#next-20230803). Thanks and Regards, Md Danish Anwar Grygorii Strashko (1): net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support Md Danish Anwar (1): dt-bindings: net: Add ICSS IEP Roger Quadros (2): net: ti: icss-iep: Add IEP driver net: ti: icssg-prueth: add packet timestamping and ptp support .../devicetree/bindings/net/ti,icss-iep.yaml | 37 + drivers/net/ethernet/ti/Kconfig | 12 + drivers/net/ethernet/ti/Makefile | 1 + drivers/net/ethernet/ti/icssg/icss_iep.c | 961 ++++++++++++++++++ drivers/net/ethernet/ti/icssg/icss_iep.h | 41 + drivers/net/ethernet/ti/icssg/icssg_config.c | 6 + drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 21 + drivers/net/ethernet/ti/icssg/icssg_prueth.c | 433 +++++++- drivers/net/ethernet/ti/icssg/icssg_prueth.h | 28 +- 9 files changed, 1533 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/ti,icss-iep.yaml create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h -- 2.34.1
