[PATCH V2 2/2] dt-bindings: cpufreq: Convert ti-cpufreq to json schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move the ti-cpufreq binding over to opp and convert convert the free
text binding to json-schema.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
Changes since V1:
- Fixup $subject of the patch to indicate json schema rather than yaml.
- Change filename to matchup with binding compatible
- Dropped un-used labels
- Dropped "|" in "description"

V1: https://lore.kernel.org/all/20230724153911.1376830-6-nm@xxxxxx/

Side note: cleanups in dt is picked up on Tony's tree:
https://lore.kernel.org/all/20230731062551.GH5194@xxxxxxxxxxx/

 .../bindings/cpufreq/ti-cpufreq.txt           | 132 ------------------
 .../opp/operating-points-v2-ti-cpu.yaml       |  88 ++++++++++++
 2 files changed, 88 insertions(+), 132 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
 create mode 100644 Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
deleted file mode 100644
index 1758051798fe..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-TI CPUFreq and OPP bindings
-================================
-
-Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx
-families support different OPPs depending on the silicon variant in use.
-The ti-cpufreq driver can use revision and an efuse value from the SoC to
-provide the OPP framework with supported hardware information. This is
-used to determine which OPPs from the operating-points-v2 table get enabled
-when it is parsed by the OPP framework.
-
-Required properties:
---------------------
-In 'cpus' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
-	  omap34xx, omap36xx and am3517 SoCs
-- syscon: A phandle pointing to a syscon node representing the control module
-	  register space of the SoC.
-
-Optional properties:
---------------------
-- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
-- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: Two bitfields indicating:
-	1. Which revision of the SoC the OPP is supported by
-	2. Which eFuse bits indicate this OPP is available
-
-	A bitwise AND is performed against these values and if any bit
-	matches, the OPP gets enabled.
-
-Example:
---------
-
-/* From arch/arm/boot/dts/am33xx.dtsi */
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cpu@0 {
-		compatible = "arm,cortex-a8";
-		device_type = "cpu";
-		reg = <0>;
-
-		operating-points-v2 = <&cpu0_opp_table>;
-
-		clocks = <&dpll_mpu_ck>;
-		clock-names = "cpu";
-
-		clock-latency = <300000>; /* From omap-cpufreq driver */
-	};
-};
-
-/*
- * cpu0 has different OPPs depending on SoC revision and some on revisions
- * 0x2 and 0x4 have eFuse bits that indicate if they are available or not
- */
-cpu0_opp_table: opp-table {
-	compatible = "operating-points-v2-ti-cpu";
-	syscon = <&scm_conf>;
-
-	/*
-	 * The three following nodes are marked with opp-suspend
-	 * because they can not be enabled simultaneously on a
-	 * single SoC.
-	 */
-	opp50-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <950000 931000 969000>;
-		opp-supported-hw = <0x06 0x0010>;
-		opp-suspend;
-	};
-
-	opp100-275000000 {
-		opp-hz = /bits/ 64 <275000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x01 0x00FF>;
-		opp-suspend;
-	};
-
-	opp100-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x06 0x0020>;
-		opp-suspend;
-	};
-
-	opp100-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	opp100-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x06 0x0040>;
-	};
-
-	opp120-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <1200000 1176000 1224000>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	opp120-720000000 {
-		opp-hz = /bits/ 64 <720000000>;
-		opp-microvolt = <1200000 1176000 1224000>;
-		opp-supported-hw = <0x06 0x0080>;
-	};
-
-	oppturbo-720000000 {
-		opp-hz = /bits/ 64 <720000000>;
-		opp-microvolt = <1260000 1234800 1285200>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	oppturbo-800000000 {
-		opp-hz = /bits/ 64 <800000000>;
-		opp-microvolt = <1260000 1234800 1285200>;
-		opp-supported-hw = <0x06 0x0100>;
-	};
-
-	oppnitro-1000000000 {
-		opp-hz = /bits/ 64 <1000000000>;
-		opp-microvolt = <1325000 1298500 1351500>;
-		opp-supported-hw = <0x04 0x0200>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
new file mode 100644
index 000000000000..ada57bfc1da9
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CPU OPP (Operating Performance Points)
+
+description:
+  Certain TI SoCs, like those in the am335x, am437x, am57xx, am62x and dra7xx
+  families support different OPPs depending on the silicon variant in use.
+  The ti-cpufreq driver can use revision and an efuse value from the SoC to
+  provide the OPP framework with supported hardware information. This is
+  used to determine which OPPs from the operating-points-v2 table get enabled
+  when it is parsed by the OPP framework.
+
+maintainers:
+  - Nishanth Menon <nm@xxxxxx>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-ti-cpu
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      points to syscon node representing the control module
+      register space of the SoC.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp(-?[0-9]+)*$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      clock-latency-ns: true
+      opp-hz: true
+      opp-microvolt: true
+      opp-supported-hw: true
+      opp-suspend: true
+      turbo-mode: true
+
+    required:
+      - opp-hz
+      - opp-supported-hw
+
+required:
+  - compatible
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    opp-table {
+        compatible = "operating-points-v2-ti-cpu";
+        syscon = <&scm_conf>;
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0020>;
+            opp-suspend;
+        };
+
+        opp-500000000 {
+            opp-hz = /bits/ 64 <500000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x01 0xFFFF>;
+        };
+
+        opp-600000000 {
+            opp-hz = /bits/ 64 <600000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0040>;
+        };
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <1325000 1298500 1351500>;
+            opp-supported-hw = <0x04 0x0200>;
+        };
+    };
-- 
2.40.0




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux