On Tue, Aug 11, 2009 at 05:17:56PM -0400, Peter Barada wrote: > On Tue, 2009-08-11 at 23:51 +0300, Felipe Balbi wrote: > > Hi, > > > > On Tue, Aug 11, 2009 at 11:21:17AM -0400, Peter Barada wrote: > > > Unfortunately, with the patch, and: > > > > > > 1) modprobe musb_hdrc > > > 2) modprobe g_ether > > > 3) connect micro-a cable > > > 4) echo 1 > /sys/devices/platform/musb_hdrc/connect > > > > > > Nothing happens - no isr or output. > > > > did you have anything at the other end of the micro-a cable ? > > Not then. :) > > I just connected my OTG adapter/thumbdrive, in step three and nothing > no isr or output. > > I know my OTG adapter (micro-a -> female A) is valid as I ohm'd out ID > and ground on the baseboard (with the SOM removed), and indeed ID is > shorted to ground with the adapter plugged in and open with it > removed... Well, looks like I'll have to go back to my documentation tomorrow at the office and see if I can get it working on one board of mine, let's see what happens and if I have to patch anything and what. -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
