On Tue, Aug 11, 2009 at 3:23 PM, Tony Lindgren<tony@xxxxxxxxxxx> wrote:
> Add support for flash on SDP boards. Currently only onenand
> is supported.
>
> Only tested on 3430SDP, somebody please test on 2430SDP and
> check the chip select for 2430SDP.
>
> Also note that in the earlier 2430SDP code the kernel partition
> was set to only 1MB instead of 2MB on 3430SDP. If people want
> the old partition sizes back on 2430SDP, please provide a patch.
>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/Makefile | 2 +
> arch/arm/mach-omap2/board-2430sdp.c | 2 +
> arch/arm/mach-omap2/board-3430sdp.c | 2 +
> arch/arm/mach-omap2/board-sdp-flash.c | 78 +++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/board-sdp.h | 9 ++++
> 5 files changed, 93 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-sdp-flash.c
> create mode 100644 arch/arm/mach-omap2/board-sdp.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 735bae5..2a2361e 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
> obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
> obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
> obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
> + board-sdp-flash.o \
> mmc-twl4030.o
> obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
> obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
> @@ -61,6 +62,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
> obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
> mmc-twl4030.o
> obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
> + board-sdp-flash.o \
> mmc-twl4030.o
>
> obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
> index 03f0887..bea6f06 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -39,6 +39,7 @@
> #include <mach/gpmc-smc91x.h>
>
> #include "mmc-twl4030.h"
> +#include "board-sdp.h"
>
> #define SDP2430_CS0_BASE 0x04000000
> #define SECONDARY_LCD_GPIO 147
> @@ -210,6 +211,7 @@ static void __init omap_2430sdp_init(void)
> twl4030_mmc_init(mmc);
> usb_musb_init();
> board_smc91x_init();
> + sdp_flash_init();
>
> /* Turn off secondary LCD backlight */
> ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
> index 3f5c316..f5c8fa7 100644
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -43,6 +43,7 @@
>
> #include "sdram-qimonda-hyb18m512160af-6.h"
> #include "mmc-twl4030.h"
> +#include "board-sdp.h"
>
> #define CONFIG_DISABLE_HFCLK 1
>
> @@ -494,6 +495,7 @@ static void __init omap_3430sdp_init(void)
> omap_serial_init(&sdp3430_uart_config);
> usb_musb_init();
> board_smc91x_init();
> + sdp_flash_init();
> }
>
> static void __init omap_3430sdp_map_io(void)
> diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
> new file mode 100644
> index 0000000..1496d89
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-sdp-flash.c
> @@ -0,0 +1,78 @@
> +/*
> + * linux/arch/arm/mach-omap2/board-sdp-flash.c
> + *
> + *
> + * Copyright (C) 2009 Nokia Corporation
> + * Copyright (C) 2007 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +
> +#include <mach/onenand.h>
> +
> +/* REVISIT: Add support for other flash memory types */
> +
> +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
> + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
> +
> +static struct mtd_partition board_onenand_partitions[] = {
> + {
> + .name = "X-Loader-OneNAND",
> + .offset = 0,
> + .size = 4 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE /* force read-only */
> + },
> + {
> + .name = "U-Boot-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 2 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE /* force read-only */
> + },
> + {
> + .name = "U-Boot Environment-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 1 * (64 * 2048),
> + },
> + {
> + .name = "Kernel-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 16 * (64 * 2048),
> + },
> + {
> + .name = "File System-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct omap_onenand_platform_data board_onenand_data = {
> + .cs = 2, /* REVISIT: Is this the same for 2430 SDP? */
SDP3430 V2 Board CS organization is different from SDP3430 V1. Now 4
dip switches are used to specify CS configuration for flashes.
-vimal
> + .parts = board_onenand_partitions,
> + .nr_parts = ARRAY_SIZE(board_onenand_partitions),
> + .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
> +};
> +
> +static void __init board_onenand_init(void)
> +{
> + gpmc_onenand_init(&board_onenand_data);
> +}
> +
> +#else
> +
> +static inline void board_onenand_init(void)
> +{
> +}
> +
> +#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
> +
> +void __init sdp_flash_init(void)
> +{
> + board_onenand_init();
> +}
> diff --git a/arch/arm/mach-omap2/board-sdp.h b/arch/arm/mach-omap2/board-sdp.h
> new file mode 100644
> index 0000000..ad72189
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-sdp.h
> @@ -0,0 +1,9 @@
> +/*
> + * arch/arm/plat-omap/include/mach/board-sdp.h
> + *
> + * Information structures for SDP-specific board config data
> + *
> + * Copyright (C) 2009 Nokia Corporation
> + */
> +
> +extern void sdp_flash_init(void);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
---
Regards,
\/ | |\/| /-\ |_
____ __o
------ -\<,
----- ( )/ ( )
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
