* Jonathan McDowell <noodles@xxxxxxxx> [090810 13:01]: > On Mon, Aug 10, 2009 at 11:12:48AM +0200, Janusz Krzysztofik wrote: > > Jonathan, Tony, > > > > Any chance for this patch ready for 2.6.32 inclusion? Or maybe v2, > > that has no external dependencies and can be updated later to v3 when > > Vikram's changes get accepted upstream? > > Vikram's patch is in linux-next, so there shouldn't be a problem with > this version of your patch for 2.6.32. I haven't been able to test it > myself (though I hope to next week), but it looks ok from a brief > inspection, so: > > Acked-By: Jonathan McDowell <noodles@xxxxxxxx> Looks good to me, will queue it to my omap1-upstream shortly. Tony > > > Monday 06 July 2009 12:24:27 Janusz Krzysztofik wrote: > > > This patch adds support for modem device found on Amstrad E3 (Delta) board. > > > > > > Based on earlier patch by Jonathan McDowell, available at > > > http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch. > > > Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c. > > > > > > This version, unlike v2, is dependent on 8250 driver changes getting > > > accepted upstream: > > > Refer: http://patchwork.kernel.org/patch/31884/ > > > > > > Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> > > > --- > > > Registering the modem platform device from a separate arch_initcall (and > > > not from init_machine() callback) preserves serial console port at ttyS0. > > > > > > OMAP mux pin set up just for case if Amstrad bootloader is ever replaced. > > > > > > Warning: > > > could cause compilation break if 8250 patch is not integrated first > > > > > > --- linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c.orig 2009-07-04 > > > 16:39:37.000000000 +0200 +++ > > > linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c 2009-07-05 > > > 13:41:08.000000000 +0200 @@ -15,8 +15,11 @@ > > > #include <linux/kernel.h> > > > #include <linux/init.h> > > > #include <linux/input.h> > > > +#include <linux/interrupt.h> > > > #include <linux/platform_device.h> > > > +#include <linux/serial_8250.h> > > > > > > +#include <asm/serial.h> > > > #include <mach/hardware.h> > > > #include <asm/mach-types.h> > > > #include <asm/mach/arch.h> > > > @@ -235,6 +238,41 @@ static void __init ams_delta_init(void) > > > platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); > > > } > > > > > > +static struct plat_serial8250_port ams_delta_modem_ports[] = { > > > + { > > > + .membase = (void *) AMS_DELTA_MODEM_VIRT, > > > + .mapbase = AMS_DELTA_MODEM_PHYS, > > > + .irq = -EINVAL, /* changed later */ > > > + .flags = UPF_BOOT_AUTOCONF, > > > + .irqflags = IRQF_TRIGGER_RISING, > > > + .iotype = UPIO_MEM, > > > + .regshift = 1, > > > + .uartclk = BASE_BAUD * 16, > > > + }, > > > + { }, > > > +}; > > > + > > > +static struct platform_device ams_delta_modem_device = { > > > + .name = "serial8250", > > > + .id = PLAT8250_DEV_PLATFORM1, > > > + .dev = { > > > + .platform_data = ams_delta_modem_ports, > > > + }, > > > +}; > > > + > > > +static int __init ams_delta_modem_init(void) > > > +{ > > > + omap_cfg_reg(M14_1510_GPIO2); > > > + ams_delta_modem_ports[0].irq = gpio_to_irq(2); > > > + > > > + ams_delta_latch2_write( > > > + AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, > > > + AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); > > > + > > > + return platform_device_register(&ams_delta_modem_device); > > > +} > > > +arch_initcall(ams_delta_modem_init); > > > + > > > static void __init ams_delta_map_io(void) > > > { > > > omap1_map_common_io(); > > > > > > J. > > -- > Revd. Jonathan McDowell, ULC | I am a passenger. > > ------------------------------------------------------------------- > List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel > FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php > Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
