On 3/7/2023 7:07 PM, Daniel Lezcano wrote:
> Currently the TI thermal driver sets the sensor update interval based
> on the polling of the thermal zone. In order to get the polling rate,
> the code inspects the thermal zone device strcuture internals, thus
> breaking the self-encapsulation of the thermal framework core
> framework.
>
> On the other side, we see the common polling rates set in the device
> tree for the platforms using this driver are 500 or 1000 ms.
>
> Setting the polling rate to 250 ms would be far enough to cover the
> combination we found in the device tree.
>
> Instead of accessing the thermal zone device structure polling rate,
> let's use a common update interval of 250 ms for the driver.
>
> Cc: Keerthy <j-keerthy@xxxxxx>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> index 0c8914017c18..430c4b43151f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> @@ -23,6 +23,8 @@
> #include "ti-bandgap.h"
> #include "../thermal_hwmon.h"
>
> +#define TI_BANDGAP_UPDATE_INTERVAL_MS 250
> +
> /* common data structures */
> struct ti_thermal_data {
> struct cpufreq_policy *policy;
> @@ -159,7 +161,6 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
> char *domain)
> {
> struct ti_thermal_data *data;
> - int interval;
>
> data = ti_bandgap_get_sensor_data(bgp, id);
>
> @@ -177,10 +178,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
> return PTR_ERR(data->ti_thermal);
> }
>
> - interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
> -
> ti_bandgap_set_sensor_data(bgp, id, data);
> - ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
> + ti_bandgap_write_update_interval(bgp, data->sensor_id,
> + TI_BANDGAP_UPDATE_INTERVAL_MS);
Reviewed-by: Dhruva Gole <d-gole@xxxxxx>
>
> if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
> dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
--
Regards,
Dhruva Gole <d-gole@xxxxxx>
