Remove underscore in node names following conventions.
Signed-off-by: Steffen Hemer <s.hemer@xxxxxxxxx>
---
arch/arm/boot/dts/am335x-regor.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 7b3966ee51b9..3894f14a914c 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -18,7 +18,7 @@ vcc3v3: fixedregulator@1 {
};
/* User IO */
- user_leds: user_leds {
+ user_leds: user-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_leds_pins>;
@@ -39,7 +39,7 @@ error-led {
/* User Leds */
&am33xx_pinmux {
- user_leds_pins: pinmux_user_leds {
+ user_leds_pins: pinmux-user-leds {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */
AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */
@@ -49,7 +49,7 @@ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_
/* CAN Busses */
&am33xx_pinmux {
- dcan1_pins: pinmux_dcan1 {
+ dcan1_pins: pinmux-dcan1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -65,7 +65,7 @@ &dcan1 {
/* Ethernet */
&am33xx_pinmux {
- ethernet1_pins: pinmux_ethernet1 {
+ ethernet1_pins: pinmux-ethernet1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
@@ -108,7 +108,7 @@ &am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&user_gpios_pins>;
- user_gpios_pins: pinmux_user_gpios {
+ user_gpios_pins: pinmux-user-gpios {
pinctrl-single,pins = <
/* DIGIN 1-4 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */
@@ -126,7 +126,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_
/* MMC */
&am33xx_pinmux {
- mmc1_pins: pinmux_mmc1 {
+ mmc1_pins: pinmux-mmc1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -155,14 +155,14 @@ &i2c_rtc {
/* UARTs */
&am33xx_pinmux {
- uart0_pins: pinmux_uart0 {
+ uart0_pins: pinmux-uart0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
- uart2_pins: pinmux_uart2 {
+ uart2_pins: pinmux-uart2 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
@@ -184,7 +184,7 @@ &uart2 {
/* RS485 - UART1 */
&am33xx_pinmux {
- uart1_rs485_pins: pinmux_uart1_rs485_pins {
+ uart1_rs485_pins: pinmux-uart1-rs485-pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
--
2.34.1
