Change node name of sound card to recommended generic and remove also
further underscores in other node names.
Signed-off-by: Steffen Hemer <s.hemer@xxxxxxxxx>
---
arch/arm/boot/dts/am335x-wega.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 6c5d26bbe952..7e9a07b519bd 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -8,7 +8,7 @@ / {
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
- sound: sound-iface {
+ sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "snd-wega";
simple-audio-card,format = "i2s";
@@ -50,7 +50,7 @@ vcc3v3: fixedregulator1 {
/* Audio */
&am33xx_pinmux {
- mcasp0_pins: pinmux_mcasp0 {
+ mcasp0_pins: pinmux-mcasp0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -91,7 +91,7 @@ &mcasp0 {
/* CAN Busses */
&am33xx_pinmux {
- dcan1_pins: pinmux_dcan1 {
+ dcan1_pins: pinmux-dcan1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -107,7 +107,7 @@ &dcan1 {
/* Ethernet */
&am33xx_pinmux {
- ethernet1_pins: pinmux_ethernet1 {
+ ethernet1_pins: pinmux-ethernet1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
@@ -147,7 +147,7 @@ &mac_sw {
/* MMC */
&am33xx_pinmux {
- mmc1_pins: pinmux_mmc1 {
+ mmc1_pins: pinmux-mmc1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -177,14 +177,14 @@ &vdig1_reg {
/* UARTs */
&am33xx_pinmux {
- uart0_pins: pinmux_uart0 {
+ uart0_pins: pinmux-uart0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
- uart1_pins: pinmux_uart1_pins {
+ uart1_pins: pinmux-uart1 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
--
2.34.1
