Due to wrong interpretation of the specification, custom implementation was used instead of standard regmap helper. LINK: https://lore.kernel.org/all/c2014039-f1e8-6976-33d6-52e2dd4e7b66@xxxxxxxxxxxx/ Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support") Regulator does NOT require to be off to be switched to bypass mode. Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx> --- drivers/regulator/tps65219-regulator.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c index 070159cb5f09..58f6541b6417 100644 --- a/drivers/regulator/tps65219-regulator.c +++ b/drivers/regulator/tps65219-regulator.c @@ -173,24 +173,6 @@ static unsigned int tps65219_get_mode(struct regulator_dev *dev) return REGULATOR_MODE_NORMAL; } -/* - * generic regulator_set_bypass_regmap does not fully match requirements - * TPS65219 Requires explicitly that regulator is disabled before switch - */ -static int tps65219_set_bypass(struct regulator_dev *dev, bool enable) -{ - struct tps65219 *tps = rdev_get_drvdata(dev); - unsigned int rid = rdev_get_id(dev); - - if (dev->desc->ops->is_enabled(dev)) { - dev_err(tps->dev, - "%s LDO%d enabled, must be shut down to set bypass ", - __func__, rid); - return -EBUSY; - } - return regulator_set_bypass_regmap(dev, enable); -} - /* Operations permitted on BUCK1/2/3 */ static const struct regulator_ops tps65219_bucks_ops = { .is_enabled = regulator_is_enabled_regmap, @@ -217,7 +199,7 @@ static const struct regulator_ops tps65219_ldos_1_2_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, - .set_bypass = tps65219_set_bypass, + .set_bypass = regulator_set_bypass_regmap, .get_bypass = regulator_get_bypass_regmap, }; -- 2.34.1
