Hello all, These is an uncontroversial (hopefully) DT Overlay to support the TI AM57x EVM. More complex cases are staged and ready to follow but wanted to test the water with this one. For some reason dtbs_check does not get run on overlays, this will need further investigation to fix in kbuild. For now I ran it through manually but am not 100% sure it actually checked it, so double checks here very welcome. Thanks, Andrew Changes from v2: - Rebased on v6.2-rc5 Changes from v1: - Made touchscreen node name generic - Used proper interrupt flags Andrew Davis (3): ARM: dts: ti: Add AM57xx GP EVM board support ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support ARM: dts: am57xx-idk: Add IDK displays and touchscreens arch/arm/boot/dts/Makefile | 8 ++ arch/arm/boot/dts/am571x-idk-touchscreen.dtso | 32 +++++ arch/arm/boot/dts/am572x-idk-touchscreen.dtso | 32 +++++ arch/arm/boot/dts/am57xx-evm.dtso | 127 ++++++++++++++++++ .../boot/dts/am57xx-idk-lcd-osd101t2045.dtso | 63 +++++++++ .../boot/dts/am57xx-idk-lcd-osd101t2587.dtso | 66 +++++++++ 6 files changed, 328 insertions(+) create mode 100644 arch/arm/boot/dts/am571x-idk-touchscreen.dtso create mode 100644 arch/arm/boot/dts/am572x-idk-touchscreen.dtso create mode 100644 arch/arm/boot/dts/am57xx-evm.dtso create mode 100644 arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso create mode 100644 arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso -- 2.38.1
