* Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> [221212 12:49]: > On Mon, 12 Dec 2022, Tony Lindgren wrote: > > > Hi Ilpo, > > > > * Tony Lindgren <tony@xxxxxxxxxxx> [221208 11:13]: > > > * Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> [221208 10:48]: > > > > With the other patch on top of this, yes, I did see uninitialized > > > > port->port_dev already in serial_core_add_one_port()->uart_configure_port(). > > > > While that could be solved by removing the pm_runtime_*() calls from > > > > there, I think it's a generic problem because after > > > > serial_core_add_one_port() the port can have anything happening on it, no? > > > > > > OK. Sounds like it should get sorted out by moving the call to > > > serial_core_add_one_port() to happen after the devices are created. > > > > Can you give a try with the patch below and see if it works for you? > > This one worked, yes. OK good to hear. I'll send out v5 after -rc1 then. Thanks, Tony
