[PATCH 12/20] OMAP: DSS2: RFBI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



RFBI (Remote FrameBuffer Interface) implements MIPI DBI interface.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
---
 drivers/video/omap2/dss/rfbi.c | 1310 ++++++++++++++++++++++++++++++++++++++++
 1 files changed, 1310 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/dss/rfbi.c

diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
new file mode 100644
index 0000000..9dd2349
--- /dev/null
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -0,0 +1,1310 @@
+/*
+ * linux/drivers/video/omap2/dss/rfbi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "RFBI"
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/kfifo.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/seq_file.h>
+
+#include <mach/board.h>
+#include <mach/display.h>
+#include "dss.h"
+
+/*#define MEASURE_PERF*/
+
+#define RFBI_BASE               0x48050800
+
+struct rfbi_reg { u16 idx; };
+
+#define RFBI_REG(idx)		((const struct rfbi_reg) { idx })
+
+#define RFBI_REVISION		RFBI_REG(0x0000)
+#define RFBI_SYSCONFIG		RFBI_REG(0x0010)
+#define RFBI_SYSSTATUS		RFBI_REG(0x0014)
+#define RFBI_CONTROL		RFBI_REG(0x0040)
+#define RFBI_PIXEL_CNT		RFBI_REG(0x0044)
+#define RFBI_LINE_NUMBER	RFBI_REG(0x0048)
+#define RFBI_CMD		RFBI_REG(0x004c)
+#define RFBI_PARAM		RFBI_REG(0x0050)
+#define RFBI_DATA		RFBI_REG(0x0054)
+#define RFBI_READ		RFBI_REG(0x0058)
+#define RFBI_STATUS		RFBI_REG(0x005c)
+
+#define RFBI_CONFIG(n)		RFBI_REG(0x0060 + (n)*0x18)
+#define RFBI_ONOFF_TIME(n)	RFBI_REG(0x0064 + (n)*0x18)
+#define RFBI_CYCLE_TIME(n)	RFBI_REG(0x0068 + (n)*0x18)
+#define RFBI_DATA_CYCLE1(n)	RFBI_REG(0x006c + (n)*0x18)
+#define RFBI_DATA_CYCLE2(n)	RFBI_REG(0x0070 + (n)*0x18)
+#define RFBI_DATA_CYCLE3(n)	RFBI_REG(0x0074 + (n)*0x18)
+
+#define RFBI_VSYNC_WIDTH	RFBI_REG(0x0090)
+#define RFBI_HSYNC_WIDTH	RFBI_REG(0x0094)
+
+#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
+
+#define REG_FLD_MOD(idx, val, start, end) \
+	rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
+
+/* To work around an RFBI transfer rate limitation */
+#define OMAP_RFBI_RATE_LIMIT    1
+
+enum omap_rfbi_cycleformat {
+	OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
+	OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
+	OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2,
+	OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3,
+};
+
+enum omap_rfbi_datatype {
+	OMAP_DSS_RFBI_DATATYPE_12 = 0,
+	OMAP_DSS_RFBI_DATATYPE_16 = 1,
+	OMAP_DSS_RFBI_DATATYPE_18 = 2,
+	OMAP_DSS_RFBI_DATATYPE_24 = 3,
+};
+
+enum omap_rfbi_parallelmode {
+	OMAP_DSS_RFBI_PARALLELMODE_8 = 0,
+	OMAP_DSS_RFBI_PARALLELMODE_9 = 1,
+	OMAP_DSS_RFBI_PARALLELMODE_12 = 2,
+	OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
+};
+
+enum update_cmd {
+	RFBI_CMD_UPDATE = 0,
+	RFBI_CMD_SYNC   = 1,
+};
+
+static int rfbi_convert_timings(struct rfbi_timings *t);
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
+static void process_cmd_fifo(void);
+
+static struct {
+	void __iomem	*base;
+
+	unsigned long	l4_khz;
+
+	enum omap_rfbi_datatype datatype;
+	enum omap_rfbi_parallelmode parallelmode;
+
+	enum omap_rfbi_te_mode te_mode;
+	int te_enabled;
+
+	void (*framedone_callback)(void *data);
+	void *framedone_callback_data;
+
+	struct omap_dss_device *dssdev[2];
+
+	struct kfifo      *cmd_fifo;
+	spinlock_t        cmd_lock;
+	struct completion cmd_done;
+	atomic_t          cmd_fifo_full;
+	atomic_t          cmd_pending;
+#ifdef MEASURE_PERF
+	unsigned perf_bytes;
+	ktime_t perf_setup_time;
+	ktime_t perf_start_time;
+#endif
+} rfbi;
+
+struct update_region {
+	u16	x;
+	u16     y;
+	u16     w;
+	u16     h;
+};
+
+struct update_param {
+	u8 rfbi_module;
+	u8 cmd;
+
+	union {
+		struct update_region r;
+		struct completion *sync;
+	} par;
+};
+
+static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
+{
+	__raw_writel(val, rfbi.base + idx.idx);
+}
+
+static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
+{
+	return __raw_readl(rfbi.base + idx.idx);
+}
+
+static void rfbi_enable_clocks(bool enable)
+{
+	if (enable)
+		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	else
+		dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+void omap_rfbi_write_command(const void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		const u8 *b = buf;
+		for (; len; len--)
+			rfbi_write_reg(RFBI_CMD, *b++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		const u16 *w = buf;
+		BUG_ON(len & 1);
+		for (; len; len -= 2)
+			rfbi_write_reg(RFBI_CMD, *w++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_command);
+
+void omap_rfbi_read_data(void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		u8 *b = buf;
+		for (; len; len--) {
+			rfbi_write_reg(RFBI_READ, 0);
+			*b++ = rfbi_read_reg(RFBI_READ);
+		}
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		u16 *w = buf;
+		BUG_ON(len & ~1);
+		for (; len; len -= 2) {
+			rfbi_write_reg(RFBI_READ, 0);
+			*w++ = rfbi_read_reg(RFBI_READ);
+		}
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_read_data);
+
+void omap_rfbi_write_data(const void *buf, u32 len)
+{
+	rfbi_enable_clocks(1);
+	switch (rfbi.parallelmode) {
+	case OMAP_DSS_RFBI_PARALLELMODE_8:
+	{
+		const u8 *b = buf;
+		for (; len; len--)
+			rfbi_write_reg(RFBI_PARAM, *b++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_16:
+	{
+		const u16 *w = buf;
+		BUG_ON(len & 1);
+		for (; len; len -= 2)
+			rfbi_write_reg(RFBI_PARAM, *w++);
+		break;
+	}
+
+	case OMAP_DSS_RFBI_PARALLELMODE_9:
+	case OMAP_DSS_RFBI_PARALLELMODE_12:
+	default:
+		BUG();
+
+	}
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_data);
+
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h)
+{
+	int start_offset = scr_width * y + x;
+	int horiz_offset = scr_width - w;
+	int i;
+
+	rfbi_enable_clocks(1);
+
+	if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+		const u16 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				const u8 __iomem *b = (const u8 __iomem *)pd;
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+		const u32 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				const u8 __iomem *b = (const u8 __iomem *)pd;
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) {
+		const u16 __iomem *pd = buf;
+		pd += start_offset;
+
+		for (; h; --h) {
+			for (i = 0; i < w; ++i) {
+				rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
+				++pd;
+			}
+			pd += horiz_offset;
+		}
+	} else {
+		BUG();
+	}
+
+	rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_pixels);
+
+#ifdef MEASURE_PERF
+static void perf_mark_setup(void)
+{
+	rfbi.perf_setup_time = ktime_get();
+}
+
+static void perf_mark_start(void)
+{
+	rfbi.perf_start_time = ktime_get();
+}
+
+static void perf_show(const char *name)
+{
+	ktime_t t, setup_time, trans_time;
+	u32 total_bytes;
+	u32 setup_us, trans_us, total_us;
+
+	t = ktime_get();
+
+	setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
+	setup_us = (u32)ktime_to_us(setup_time);
+	if (setup_us == 0)
+		setup_us = 1;
+
+	trans_time = ktime_sub(t, rfbi.perf_start_time);
+	trans_us = (u32)ktime_to_us(trans_time);
+	if (trans_us == 0)
+		trans_us = 1;
+
+	total_us = setup_us + trans_us;
+
+	total_bytes = rfbi.perf_bytes;
+
+	DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
+			"%u kbytes/sec\n",
+			name,
+			setup_us,
+			trans_us,
+			total_us,
+			1000*1000 / total_us,
+			total_bytes,
+			total_bytes * 1000 / total_us);
+}
+#else
+#define perf_mark_setup()
+#define perf_mark_start()
+#define perf_show(x)
+#endif
+
+void rfbi_transfer_area(u16 width, u16 height,
+			     void (callback)(void *data), void *data)
+{
+	u32 l;
+
+	/*BUG_ON(callback == 0);*/
+	BUG_ON(rfbi.framedone_callback != NULL);
+
+	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
+
+	dispc_set_lcd_size(width, height);
+
+	dispc_enable_lcd_out(1);
+
+	rfbi.framedone_callback = callback;
+	rfbi.framedone_callback_data = data;
+
+	rfbi_enable_clocks(1);
+
+	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+	l = FLD_MOD(l, 1, 0, 0); /* enable */
+	if (!rfbi.te_enabled)
+		l = FLD_MOD(l, 1, 4, 4); /* ITE */
+
+	perf_mark_start();
+
+	rfbi_write_reg(RFBI_CONTROL, l);
+}
+
+static void framedone_callback(void *data, u32 mask)
+{
+	void (*callback)(void *data);
+
+	DSSDBG("FRAMEDONE\n");
+
+	perf_show("DISPC");
+
+	REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
+
+	rfbi_enable_clocks(0);
+
+	callback = rfbi.framedone_callback;
+	rfbi.framedone_callback = NULL;
+
+	/*callback(rfbi.framedone_callback_data);*/
+
+	atomic_set(&rfbi.cmd_pending, 0);
+
+	process_cmd_fifo();
+}
+
+#if 1 /* VERBOSE */
+static void rfbi_print_timings(void)
+{
+	u32 l;
+	u32 time;
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	time = 1000000000 / rfbi.l4_khz;
+	if (l & (1 << 4))
+		time *= 2;
+
+	DSSDBG("Tick time %u ps\n", time);
+	l = rfbi_read_reg(RFBI_ONOFF_TIME(0));
+	DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
+		"REONTIME %d, REOFFTIME %d\n",
+		l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
+		(l >> 20) & 0x0f, (l >> 24) & 0x3f);
+
+	l = rfbi_read_reg(RFBI_CYCLE_TIME(0));
+	DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
+		"ACCESSTIME %d\n",
+		(l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
+		(l >> 22) & 0x3f);
+}
+#else
+static void rfbi_print_timings(void) {}
+#endif
+
+
+
+
+static u32 extif_clk_period;
+
+static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
+{
+	int bus_tick = extif_clk_period * div;
+	return (ps + bus_tick - 1) / bus_tick * bus_tick;
+}
+
+static int calc_reg_timing(struct rfbi_timings *t, int div)
+{
+	t->clk_div = div;
+
+	t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div);
+
+	t->we_on_time = round_to_extif_ticks(t->we_on_time, div);
+	t->we_off_time = round_to_extif_ticks(t->we_off_time, div);
+	t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div);
+
+	t->re_on_time = round_to_extif_ticks(t->re_on_time, div);
+	t->re_off_time = round_to_extif_ticks(t->re_off_time, div);
+	t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div);
+
+	t->access_time = round_to_extif_ticks(t->access_time, div);
+	t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div);
+	t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div);
+
+	DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n",
+	       t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
+	DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n",
+	       t->we_on_time, t->we_off_time, t->re_cycle_time,
+	       t->we_cycle_time);
+	DSSDBG("[reg]rdaccess %d cspulse %d\n",
+	       t->access_time, t->cs_pulse_width);
+
+	return rfbi_convert_timings(t);
+}
+
+static int calc_extif_timings(struct rfbi_timings *t)
+{
+	u32 max_clk_div;
+	int div;
+
+	rfbi_get_clk_info(&extif_clk_period, &max_clk_div);
+	for (div = 1; div <= max_clk_div; div++) {
+		if (calc_reg_timing(t, div) == 0)
+			break;
+	}
+
+	if (div <= max_clk_div)
+		return 0;
+
+	DSSERR("can't setup timings\n");
+	return -1;
+}
+
+
+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
+{
+	int r;
+
+	if (!t->converted) {
+		r = calc_extif_timings(t);
+		if (r < 0)
+			DSSERR("Failed to calc timings\n");
+	}
+
+	BUG_ON(!t->converted);
+
+	rfbi_enable_clocks(1);
+	rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]);
+	rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]);
+
+	/* TIMEGRANULARITY */
+	REG_FLD_MOD(RFBI_CONFIG(rfbi_module),
+		    (t->tim[2] ? 1 : 0), 4, 4);
+
+	rfbi_print_timings();
+	rfbi_enable_clocks(0);
+}
+
+static int ps_to_rfbi_ticks(int time, int div)
+{
+	unsigned long tick_ps;
+	int ret;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = 1000000000 / (rfbi.l4_khz) * div;
+
+	ret = (time + tick_ps - 1) / tick_ps;
+
+	return ret;
+}
+
+#ifdef OMAP_RFBI_RATE_LIMIT
+unsigned long rfbi_get_max_tx_rate(void)
+{
+	unsigned long   l4_rate, dss1_rate;
+	int             min_l4_ticks = 0;
+	int             i;
+
+	/* According to TI this can't be calculated so make the
+	 * adjustments for a couple of known frequencies and warn for
+	 * others.
+	 */
+	static const struct {
+		unsigned long l4_clk;           /* HZ */
+		unsigned long dss1_clk;         /* HZ */
+		unsigned long min_l4_ticks;
+	} ftab[] = {
+		{ 55,   132,    7, },           /* 7.86 MPix/s */
+		{ 110,  110,    12, },          /* 9.16 MPix/s */
+		{ 110,  132,    10, },          /* 11   Mpix/s */
+		{ 120,  120,    10, },          /* 12   Mpix/s */
+		{ 133,  133,    10, },          /* 13.3 Mpix/s */
+	};
+
+	l4_rate = rfbi.l4_khz / 1000;
+	dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000;
+
+	for (i = 0; i < ARRAY_SIZE(ftab); i++) {
+		/* Use a window instead of an exact match, to account
+		 * for different DPLL multiplier / divider pairs.
+		 */
+		if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
+		    abs(ftab[i].dss1_clk - dss1_rate) < 3) {
+			min_l4_ticks = ftab[i].min_l4_ticks;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(ftab)) {
+		/* Can't be sure, return anyway the maximum not
+		 * rate-limited. This might cause a problem only for the
+		 * tearing synchronisation.
+		 */
+		DSSERR("can't determine maximum RFBI transfer rate\n");
+		return rfbi.l4_khz * 1000;
+	}
+	return rfbi.l4_khz * 1000 / min_l4_ticks;
+}
+#else
+int rfbi_get_max_tx_rate(void)
+{
+	return rfbi.l4_khz * 1000;
+}
+#endif
+
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
+{
+	*clk_period = 1000000000 / rfbi.l4_khz;
+	*max_clk_div = 2;
+}
+
+static int rfbi_convert_timings(struct rfbi_timings *t)
+{
+	u32 l;
+	int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
+	int actim, recyc, wecyc;
+	int div = t->clk_div;
+
+	if (div <= 0 || div > 2)
+		return -1;
+
+	/* Make sure that after conversion it still holds that:
+	 * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
+	 * csoff > cson, csoff >= max(weoff, reoff), actim > reon
+	 */
+	weon = ps_to_rfbi_ticks(t->we_on_time, div);
+	weoff = ps_to_rfbi_ticks(t->we_off_time, div);
+	if (weoff <= weon)
+		weoff = weon + 1;
+	if (weon > 0x0f)
+		return -1;
+	if (weoff > 0x3f)
+		return -1;
+
+	reon = ps_to_rfbi_ticks(t->re_on_time, div);
+	reoff = ps_to_rfbi_ticks(t->re_off_time, div);
+	if (reoff <= reon)
+		reoff = reon + 1;
+	if (reon > 0x0f)
+		return -1;
+	if (reoff > 0x3f)
+		return -1;
+
+	cson = ps_to_rfbi_ticks(t->cs_on_time, div);
+	csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
+	if (csoff <= cson)
+		csoff = cson + 1;
+	if (csoff < max(weoff, reoff))
+		csoff = max(weoff, reoff);
+	if (cson > 0x0f)
+		return -1;
+	if (csoff > 0x3f)
+		return -1;
+
+	l =  cson;
+	l |= csoff << 4;
+	l |= weon  << 10;
+	l |= weoff << 14;
+	l |= reon  << 20;
+	l |= reoff << 24;
+
+	t->tim[0] = l;
+
+	actim = ps_to_rfbi_ticks(t->access_time, div);
+	if (actim <= reon)
+		actim = reon + 1;
+	if (actim > 0x3f)
+		return -1;
+
+	wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
+	if (wecyc < weoff)
+		wecyc = weoff;
+	if (wecyc > 0x3f)
+		return -1;
+
+	recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
+	if (recyc < reoff)
+		recyc = reoff;
+	if (recyc > 0x3f)
+		return -1;
+
+	cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
+	if (cs_pulse > 0x3f)
+		return -1;
+
+	l =  wecyc;
+	l |= recyc    << 6;
+	l |= cs_pulse << 12;
+	l |= actim    << 22;
+
+	t->tim[1] = l;
+
+	t->tim[2] = div - 1;
+
+	t->converted = 1;
+
+	return 0;
+}
+
+/* xxx FIX module selection missing */
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div)
+{
+	int hs, vs;
+	int min;
+	u32 l;
+
+	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
+	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
+	if (hs < 2)
+		return -EDOM;
+	if (mode == OMAP_DSS_RFBI_TE_MODE_2)
+		min = 2;
+	else /* OMAP_DSS_RFBI_TE_MODE_1 */
+		min = 4;
+	if (vs < min)
+		return -EDOM;
+	if (vs == hs)
+		return -EINVAL;
+	rfbi.te_mode = mode;
+	DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n",
+		mode, hs, vs, hs_pol_inv, vs_pol_inv);
+
+	rfbi_enable_clocks(1);
+	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
+	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	if (hs_pol_inv)
+		l &= ~(1 << 21);
+	else
+		l |= 1 << 21;
+	if (vs_pol_inv)
+		l &= ~(1 << 20);
+	else
+		l |= 1 << 20;
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_setup_te);
+
+/* xxx FIX module selection missing */
+int omap_rfbi_enable_te(bool enable, unsigned line)
+{
+	u32 l;
+
+	DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode);
+	if (line > (1 << 11) - 1)
+		return -EINVAL;
+
+	rfbi_enable_clocks(1);
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	l &= ~(0x3 << 2);
+	if (enable) {
+		rfbi.te_enabled = 1;
+		l |= rfbi.te_mode << 2;
+	} else
+		rfbi.te_enabled = 0;
+	rfbi_write_reg(RFBI_CONFIG(0), l);
+	rfbi_write_reg(RFBI_LINE_NUMBER, line);
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_enable_te);
+
+#if 0
+static void rfbi_enable_config(int enable1, int enable2)
+{
+	u32 l;
+	int cs = 0;
+
+	if (enable1)
+		cs |= 1<<0;
+	if (enable2)
+		cs |= 1<<1;
+
+	rfbi_enable_clocks(1);
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+
+	l = FLD_MOD(l, cs, 3, 2);
+	l = FLD_MOD(l, 0, 1, 1);
+
+	rfbi_write_reg(RFBI_CONTROL, l);
+
+
+	l = rfbi_read_reg(RFBI_CONFIG(0));
+	l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
+	/*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
+	/*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
+
+	l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
+	l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
+	l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
+
+	l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
+	rfbi_write_reg(RFBI_CONFIG(0), l);
+
+	rfbi_enable_clocks(0);
+}
+#endif
+
+int rfbi_configure(int rfbi_module, int bpp, int lines)
+{
+	u32 l;
+	int cycle1 = 0, cycle2 = 0, cycle3 = 0;
+	enum omap_rfbi_cycleformat cycleformat;
+	enum omap_rfbi_datatype datatype;
+	enum omap_rfbi_parallelmode parallelmode;
+
+	switch (bpp) {
+	case 12:
+		datatype = OMAP_DSS_RFBI_DATATYPE_12;
+		break;
+	case 16:
+		datatype = OMAP_DSS_RFBI_DATATYPE_16;
+		break;
+	case 18:
+		datatype = OMAP_DSS_RFBI_DATATYPE_18;
+		break;
+	case 24:
+		datatype = OMAP_DSS_RFBI_DATATYPE_24;
+		break;
+	default:
+		BUG();
+		return 1;
+	}
+	rfbi.datatype = datatype;
+
+	switch (lines) {
+	case 8:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8;
+		break;
+	case 9:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9;
+		break;
+	case 12:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12;
+		break;
+	case 16:
+		parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16;
+		break;
+	default:
+		BUG();
+		return 1;
+	}
+	rfbi.parallelmode = parallelmode;
+
+	if ((bpp % lines) == 0) {
+		switch (bpp / lines) {
+		case 1:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1;
+			break;
+		case 2:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1;
+			break;
+		case 3:
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1;
+			break;
+		default:
+			BUG();
+			return 1;
+		}
+	} else if ((2 * bpp % lines) == 0) {
+		if ((2 * bpp / lines) == 3)
+			cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2;
+		else {
+			BUG();
+			return 1;
+		}
+	} else {
+		BUG();
+		return 1;
+	}
+
+	switch (cycleformat) {
+	case OMAP_DSS_RFBI_CYCLEFORMAT_1_1:
+		cycle1 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_2_1:
+		cycle1 = lines;
+		cycle2 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_3_1:
+		cycle1 = lines;
+		cycle2 = lines;
+		cycle3 = lines;
+		break;
+
+	case OMAP_DSS_RFBI_CYCLEFORMAT_3_2:
+		cycle1 = lines;
+		cycle2 = (lines / 2) | ((lines / 2) << 16);
+		cycle3 = (lines << 16);
+		break;
+	}
+
+	rfbi_enable_clocks(1);
+
+	REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */
+
+	l = 0;
+	l |= FLD_VAL(parallelmode, 1, 0);
+	l |= FLD_VAL(0, 3, 2);		/* TRIGGERMODE: ITE */
+	l |= FLD_VAL(0, 4, 4);		/* TIMEGRANULARITY */
+	l |= FLD_VAL(datatype, 6, 5);
+	/* l |= FLD_VAL(2, 8, 7); */	/* L4FORMAT, 2pix/L4 */
+	l |= FLD_VAL(0, 8, 7);	/* L4FORMAT, 1pix/L4 */
+	l |= FLD_VAL(cycleformat, 10, 9);
+	l |= FLD_VAL(0, 12, 11);	/* UNUSEDBITS */
+	l |= FLD_VAL(0, 16, 16);	/* A0POLARITY */
+	l |= FLD_VAL(0, 17, 17);	/* REPOLARITY */
+	l |= FLD_VAL(0, 18, 18);	/* WEPOLARITY */
+	l |= FLD_VAL(0, 19, 19);	/* CSPOLARITY */
+	l |= FLD_VAL(1, 20, 20);	/* TE_VSYNC_POLARITY */
+	l |= FLD_VAL(1, 21, 21);	/* HSYNCPOLARITY */
+	rfbi_write_reg(RFBI_CONFIG(rfbi_module), l);
+
+	rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1);
+	rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2);
+	rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3);
+
+
+	l = rfbi_read_reg(RFBI_CONTROL);
+	l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */
+	l = FLD_MOD(l, 0, 1, 1); /* clear bypass */
+	rfbi_write_reg(RFBI_CONTROL, l);
+
+
+	DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n",
+	       bpp, lines, cycle1, cycle2, cycle3);
+
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+EXPORT_SYMBOL(rfbi_configure);
+
+static int rfbi_find_display(struct omap_dss_device *dssdev)
+{
+	if (dssdev == rfbi.dssdev[0])
+		return 0;
+
+	if (dssdev == rfbi.dssdev[1])
+		return 1;
+
+	BUG();
+	return -1;
+}
+
+
+static void signal_fifo_waiters(void)
+{
+	if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
+		/* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
+		complete(&rfbi.cmd_done);
+		atomic_dec(&rfbi.cmd_fifo_full);
+	}
+}
+
+/* returns 1 for async op, and 0 for sync op */
+static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
+{
+	u16 x = upd->x;
+	u16 y = upd->y;
+	u16 w = upd->w;
+	u16 h = upd->h;
+
+	perf_mark_setup();
+
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		/*dssdev->driver->enable_te(dssdev, 1); */
+		dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+	}
+
+#ifdef MEASURE_PERF
+	rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
+#endif
+
+	dssdev->driver->setup_update(dssdev, x, y, w, h);
+
+	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+		rfbi_transfer_area(w, h, NULL, NULL);
+		return 1;
+	} else {
+		struct omap_overlay *ovl;
+		void __iomem *addr;
+		int scr_width;
+
+		ovl = dssdev->manager->overlays[0];
+		scr_width = ovl->info.screen_width;
+		addr = ovl->info.vaddr;
+
+		omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
+
+		perf_show("L4");
+
+		return 0;
+	}
+}
+
+static void process_cmd_fifo(void)
+{
+	int len;
+	struct update_param p;
+	struct omap_dss_device *dssdev;
+	unsigned long flags;
+
+	if (atomic_inc_return(&rfbi.cmd_pending) != 1)
+		return;
+
+	while (true) {
+		spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+
+		len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
+				  sizeof(struct update_param));
+		if (len == 0) {
+			DSSDBG("nothing more in fifo\n");
+			atomic_set(&rfbi.cmd_pending, 0);
+			spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+			break;
+		}
+
+		/* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
+
+		spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+		BUG_ON(len != sizeof(struct update_param));
+		BUG_ON(p.rfbi_module > 1);
+
+		dssdev = rfbi.dssdev[p.rfbi_module];
+
+		if (p.cmd == RFBI_CMD_UPDATE) {
+			if (do_update(dssdev, &p.par.r))
+				break; /* async op */
+		} else if (p.cmd == RFBI_CMD_SYNC) {
+			DSSDBG("Signaling SYNC done!\n");
+			complete(p.par.sync);
+		} else
+			BUG();
+	}
+
+	signal_fifo_waiters();
+}
+
+static void rfbi_push_cmd(struct update_param *p)
+{
+	int ret;
+
+	while (1) {
+		unsigned long flags;
+		int available;
+
+		spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+		available = RFBI_CMD_FIFO_LEN_BYTES -
+			__kfifo_len(rfbi.cmd_fifo);
+
+/*		DSSDBG("%d bytes left in fifo\n", available); */
+		if (available < sizeof(struct update_param)) {
+			DSSDBG("Going to wait because FIFO FULL..\n");
+			spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+			atomic_inc(&rfbi.cmd_fifo_full);
+			wait_for_completion(&rfbi.cmd_done);
+			/*DSSDBG("Woke up because fifo not full anymore\n");*/
+			continue;
+		}
+
+		ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
+				  sizeof(struct update_param));
+/*		DSSDBG("pushed %d bytes\n", ret);*/
+
+		spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+		BUG_ON(ret != sizeof(struct update_param));
+
+		break;
+	}
+}
+
+static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
+{
+	struct update_param p;
+
+	p.rfbi_module = rfbi_module;
+	p.cmd = RFBI_CMD_UPDATE;
+
+	p.par.r.x = x;
+	p.par.r.y = y;
+	p.par.r.w = w;
+	p.par.r.h = h;
+
+	DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
+
+	rfbi_push_cmd(&p);
+
+	process_cmd_fifo();
+}
+
+static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
+{
+	struct update_param p;
+
+	p.rfbi_module = rfbi_module;
+	p.cmd = RFBI_CMD_SYNC;
+	p.par.sync = sync_comp;
+
+	rfbi_push_cmd(&p);
+
+	DSSDBG("RFBI sync pushed to cmd fifo\n");
+
+	process_cmd_fifo();
+}
+
+void rfbi_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
+
+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+	DUMPREG(RFBI_REVISION);
+	DUMPREG(RFBI_SYSCONFIG);
+	DUMPREG(RFBI_SYSSTATUS);
+	DUMPREG(RFBI_CONTROL);
+	DUMPREG(RFBI_PIXEL_CNT);
+	DUMPREG(RFBI_LINE_NUMBER);
+	DUMPREG(RFBI_CMD);
+	DUMPREG(RFBI_PARAM);
+	DUMPREG(RFBI_DATA);
+	DUMPREG(RFBI_READ);
+	DUMPREG(RFBI_STATUS);
+
+	DUMPREG(RFBI_CONFIG(0));
+	DUMPREG(RFBI_ONOFF_TIME(0));
+	DUMPREG(RFBI_CYCLE_TIME(0));
+	DUMPREG(RFBI_DATA_CYCLE1(0));
+	DUMPREG(RFBI_DATA_CYCLE2(0));
+	DUMPREG(RFBI_DATA_CYCLE3(0));
+
+	DUMPREG(RFBI_CONFIG(1));
+	DUMPREG(RFBI_ONOFF_TIME(1));
+	DUMPREG(RFBI_CYCLE_TIME(1));
+	DUMPREG(RFBI_DATA_CYCLE1(1));
+	DUMPREG(RFBI_DATA_CYCLE2(1));
+	DUMPREG(RFBI_DATA_CYCLE3(1));
+
+	DUMPREG(RFBI_VSYNC_WIDTH);
+	DUMPREG(RFBI_HSYNC_WIDTH);
+
+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+int rfbi_init(void)
+{
+	u32 rev;
+	u32 l;
+
+	spin_lock_init(&rfbi.cmd_lock);
+	rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
+				    &rfbi.cmd_lock);
+	if (IS_ERR(rfbi.cmd_fifo))
+		return -ENOMEM;
+
+	init_completion(&rfbi.cmd_done);
+	atomic_set(&rfbi.cmd_fifo_full, 0);
+	atomic_set(&rfbi.cmd_pending, 0);
+
+	rfbi.base = ioremap(RFBI_BASE, SZ_256);
+	if (!rfbi.base) {
+		DSSERR("can't ioremap RFBI\n");
+		return -ENOMEM;
+	}
+
+	rfbi_enable_clocks(1);
+
+	msleep(10);
+
+	rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+	/* Enable autoidle and smart-idle */
+	l = rfbi_read_reg(RFBI_SYSCONFIG);
+	l |= (1 << 0) | (2 << 3);
+	rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+	rev = rfbi_read_reg(RFBI_REVISION);
+	printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+	rfbi_enable_clocks(0);
+
+	return 0;
+}
+
+void rfbi_exit(void)
+{
+	DSSDBG("rfbi_exit\n");
+
+	kfifo_free(rfbi.cmd_fifo);
+
+	iounmap(rfbi.base);
+}
+
+/* struct omap_display support */
+static int rfbi_display_update(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h)
+{
+	int rfbi_module;
+
+	if (w == 0 || h == 0)
+		return 0;
+
+	rfbi_module = rfbi_find_display(dssdev);
+
+	rfbi_push_update(rfbi_module, x, y, w, h);
+
+	return 0;
+}
+
+static int rfbi_display_sync(struct omap_dss_device *dssdev)
+{
+	struct completion sync_comp;
+	int rfbi_module;
+
+	rfbi_module = rfbi_find_display(dssdev);
+
+	init_completion(&sync_comp);
+	rfbi_push_sync(rfbi_module, &sync_comp);
+	DSSDBG("Waiting for SYNC to happen...\n");
+	wait_for_completion(&sync_comp);
+	DSSDBG("Released from SYNC\n");
+	return 0;
+}
+
+static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	dssdev->driver->enable_te(dssdev, enable);
+	return 0;
+}
+
+static int rfbi_display_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	r = omap_dss_start_device(dssdev);
+	if (r) {
+		DSSERR("failed to start device\n");
+		goto err0;
+	}
+
+	r = omap_dispc_register_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+	if (r) {
+		DSSERR("can't get FRAMEDONE irq\n");
+		goto err1;
+	}
+
+	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
+
+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI);
+
+	dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
+
+	rfbi_configure(dssdev->phy.rfbi.channel,
+			       dssdev->ctrl.pixel_size,
+			       dssdev->phy.rfbi.data_lines);
+
+	rfbi_set_timings(dssdev->phy.rfbi.channel,
+			 &dssdev->ctrl.rfbi_timings);
+
+
+	if (dssdev->driver->enable) {
+		r = dssdev->driver->enable(dssdev);
+		if (r)
+			goto err2;
+	}
+
+	return 0;
+err2:
+	omap_dispc_unregister_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+err1:
+	omap_dss_stop_device(dssdev);
+err0:
+	return r;
+}
+
+static void rfbi_display_disable(struct omap_dss_device *dssdev)
+{
+	dssdev->driver->disable(dssdev);
+	omap_dispc_unregister_isr(framedone_callback, NULL,
+			DISPC_IRQ_FRAMEDONE);
+	omap_dss_stop_device(dssdev);
+}
+
+int rfbi_init_display(struct omap_dss_device *dssdev)
+{
+	dssdev->enable = rfbi_display_enable;
+	dssdev->disable = rfbi_display_disable;
+	dssdev->update = rfbi_display_update;
+	dssdev->sync = rfbi_display_sync;
+	dssdev->enable_te = rfbi_display_enable_te;
+
+	rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
+
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+
+	return 0;
+}
-- 
1.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux