ext Kalle Jokiniemi wrote:
On Fri, 2009-08-07 at 11:48 +0300, Roger Quadros wrote:
ext Kalle Jokiniemi wrote:
On Fri, 2009-08-07 at 11:03 +0300, Roger Quadros wrote:
ext Kalle Jokiniemi wrote:
On Fri, 2009-08-07 at 01:14 +0300, Kevin Hilman wrote:
Roger Quadros <ext-roger.quadros@xxxxxxxxx> writes:
As per errata 1.142, on EMU/HS devices, SDRC_POWER should be programmed
for automatic self-refresh before transition to OFF mode.
In the current implementation this is done in omap3_scratchpad_contents()
which is wrong, since this is the value that will be restored while
resuming from OFF mode and not while transitioning to it.
This patch implements the workaround in the correct way as per errata.
Signed-off-by: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
This looks right to me.
Rajendra, Kalle, any comments? since you were the originators of
the original patch.
Kevin
---
arch/arm/mach-omap2/control.c | 16 ++--------------
arch/arm/mach-omap2/pm34xx.c | 20 ++++++++++++++------
2 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a7159a9..0a563c8 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -272,20 +272,8 @@ void omap3_save_scratchpad_contents(void)
(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
sdrc_block_contents.dll_b_ctrl = 0x0;
- /*
- * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
- * be programed to issue automatic self refresh on timeout
- * of AUTO_CNT = 1 prior to any transition to OFF mode.
- */
- if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
- && (omap_rev() >= OMAP3430_REV_ES3_0))
- sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
- ~(SDRC_POWER_AUTOCOUNT_MASK|
- SDRC_POWER_CLKCTRL_MASK)) |
- (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
- SDRC_SELF_REFRESH_ON_AUTOCOUNT;
- else
- sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+
+ sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
Why do you want to remove the workaround from scratchpad?
When we wake up from off mode, the boot ROM code writes these settings
as the first sdrc_power settings after wakeup. If that setting does not
include the workaround, we'll have a period of time where sdram is not
being refreshed. This hits especially HS devices that do long secure
context restore in ROM code as well.
I suppose SDRAM is always refreshed (i.e. auto refresh) when ON. However when we
enter OFF mode it should be _self_ refreshed. That is done by the below code
before we switch to OFF mode.
The erratum speaks of auto-refresh failing after waking up from CORE off
mode. I think there is the described workaround in place in sleep34xx.S
code to kick up the auto refresh, but this still leaves a short gap
between boot ROM and the sleep code.
Unless the self-refresh mode does not get changed by the scratchpad
settings?
- Kalle
There are 2 parts in the errata 1.142.
The 1st part is what you are talking about. And it needs to be applied only on
ES3.0 devices.
The 2nd part is valid only for HS devices.
"..it is mandatory on HS device to have the SDRC issuing automatic self-refresh
entries on inactivity periods.."
My patch is only fixing the implementation of the 2nd part without changing the
work around for the 1st part. no?
The fix for second part is ok. But I have understood that the scratchpad
change was an additional safeguard against the 1st part. Rajendra, any
comments?
I don't know how fast SDRAM corrupts when not refreshed, but on low OPP
it takes several msecs to reach public code from boot ROM. So keeping
SDRAM in self-refresh also in this period, seems sensible to me (even
though the erratum does not mention a requirement for this).
- Kalle
If what you are saying is right then this should be done for all OMAPs and not
only non GP right?
-roger
-roger
When we wake up from OFF mode (the scratchpad contents are used), we should
restore the original register setting that was there before we went to OFF mode
and not the self refresh mode setting. Hence the removal of above code.
-roger
sdrc_block_contents.cs_0 = 0x0;
sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 14f10bc..eb3c9e5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -405,15 +405,23 @@ void omap_sram_idle(void)
}
/*
- * On EMU/HS devices ROM code restores a SRDC value
- * from scratchpad which has automatic self refresh on timeout
- * of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
- * Hence store/restore the SDRC_POWER register here.
- */
+ * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
+ * be programed to issue automatic self refresh on timeout
+ * of AUTO_CNT = 1 prior to any transition to OFF mode.
+ */
+
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
omap_type() != OMAP2_DEVICE_TYPE_GP &&
- core_next_state == PWRDM_POWER_OFF)
+ core_next_state == PWRDM_POWER_OFF) {
+
sdrc_pwr = sdrc_read_reg(SDRC_POWER);
+ sdrc_write_reg((sdrc_pwr &
+ ~(SDRC_POWER_AUTOCOUNT_MASK|
+ SDRC_POWER_CLKCTRL_MASK)) |
+ (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
+ SDRC_SELF_REFRESH_ON_AUTOCOUNT,
+ SDRC_POWER);
+ }
This part seems ok to me.
- Kalle
if (regset_save_on_suspend)
pm_dbg_regset_save(1);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
