From: Arnd Bergmann <arnd@xxxxxxxx> While going through the removal of board files on some other platforms, I noticed a bit of outdated code on omap2+ that was left behind after the platform became DT only. I can put this into the same cleanup tree as the omap1 patches, or you can merge these into your omap2 tree if there are likely conflicts with other patches. Arnd Bergmann (10): ARM: omap2: remove unused USB code ARM: omap2: remove unused headers ARM: omap2: remove unused omap_hwmod_reset.c ARM: omap2: simplify clock2xxx header ARM: omap2: remove APLL control ARM: omap2: smartreflex: remove on_init control ARM: omap2: remove unused functions ARM: omap2: remove unused declarations ARM: omap2: remove unused omap2_pm_init ARM: omap2: make functions static arch/arm/mach-omap2/Makefile | 3 +- arch/arm/mach-omap2/board-n8x0.c | 2 +- arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 1 + arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 14 +- arch/arm/mach-omap2/clock.c | 2 - arch/arm/mach-omap2/clock.h | 7 - arch/arm/mach-omap2/clock2xxx.h | 29 -- arch/arm/mach-omap2/clock3xxx.h | 21 -- arch/arm/mach-omap2/clockdomain.c | 44 +-- arch/arm/mach-omap2/clockdomain.h | 4 - arch/arm/mach-omap2/cm2xxx.c | 101 +----- arch/arm/mach-omap2/cm2xxx.h | 7 - arch/arm/mach-omap2/cm2xxx_3xxx.h | 5 - arch/arm/mach-omap2/common.h | 28 -- arch/arm/mach-omap2/control.c | 73 ---- arch/arm/mach-omap2/control.h | 5 - arch/arm/mach-omap2/id.c | 2 +- arch/arm/mach-omap2/id.h | 2 - arch/arm/mach-omap2/io.c | 21 +- arch/arm/mach-omap2/omap-secure.c | 7 +- arch/arm/mach-omap2/omap-secure.h | 3 - arch/arm/mach-omap2/omap_device.c | 74 +---- arch/arm/mach-omap2/omap_device.h | 14 - arch/arm/mach-omap2/omap_hwmod.c | 94 +----- arch/arm/mach-omap2/omap_hwmod.h | 21 -- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 - .../omap_hwmod_2xxx_3xxx_ipblock_data.c | 2 +- .../omap_hwmod_2xxx_interconnect_data.c | 1 - .../mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 12 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 - arch/arm/mach-omap2/omap_hwmod_common_data.h | 6 - arch/arm/mach-omap2/omap_hwmod_reset.c | 98 ------ arch/arm/mach-omap2/omap_opp_data.h | 5 - arch/arm/mach-omap2/omap_phy_internal.c | 87 ----- arch/arm/mach-omap2/pm.c | 8 +- arch/arm/mach-omap2/pm.h | 25 -- arch/arm/mach-omap2/pm24xx.c | 312 ------------------ arch/arm/mach-omap2/powerdomain.c | 108 +----- arch/arm/mach-omap2/powerdomain.h | 8 - arch/arm/mach-omap2/prcm-common.h | 1 - arch/arm/mach-omap2/prcm_mpu44xx.c | 12 - arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h | 2 - arch/arm/mach-omap2/prm.h | 4 - arch/arm/mach-omap2/prm2xxx_3xxx.h | 3 - arch/arm/mach-omap2/prm3xxx.c | 5 +- arch/arm/mach-omap2/prm3xxx.h | 2 - arch/arm/mach-omap2/prm_common.c | 55 +-- arch/arm/mach-omap2/sdrc.c | 51 +-- arch/arm/mach-omap2/sdrc.h | 5 - arch/arm/mach-omap2/serial.h | 66 ---- arch/arm/mach-omap2/sr_device.c | 13 - arch/arm/mach-omap2/sram.h | 4 - arch/arm/mach-omap2/usb-tusb6010.c | 6 +- arch/arm/mach-omap2/usb.h | 71 ---- arch/arm/mach-omap2/vc.c | 15 - arch/arm/mach-omap2/voltage.c | 2 +- arch/arm/mach-omap2/voltage.h | 2 - drivers/soc/ti/smartreflex.c | 4 - include/linux/platform_data/voltage-omap.h | 1 - include/linux/power/smartreflex.h | 3 - include/linux/usb/musb.h | 2 - 61 files changed, 49 insertions(+), 1538 deletions(-) delete mode 100644 arch/arm/mach-omap2/clock3xxx.h delete mode 100644 arch/arm/mach-omap2/omap_hwmod_reset.c delete mode 100644 arch/arm/mach-omap2/pm24xx.c delete mode 100644 arch/arm/mach-omap2/serial.h delete mode 100644 arch/arm/mach-omap2/usb.h -- 2.29.2
