This converts the the H2 GPIO LEDs to use a machine lookup
table.
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Maciej Falkowski <maciej.falkowski9@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/mach-omap1/board-h2.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f28a4c3ea501..9301a5fca44e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -47,6 +47,7 @@
/* The first 16 SoC GPIO lines are on this GPIO chip */
#define OMAP_GPIO_LABEL "gpio-0-15"
+#define OMAP_MPUIO_LABEL "mpuio"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
@@ -276,12 +277,10 @@ static const struct gpio_led h2_gpio_led_pins[] = {
{
.name = "h2:red",
.default_trigger = "heartbeat",
- .gpio = 3,
},
{
.name = "h2:green",
.default_trigger = "cpu0",
- .gpio = OMAP_MPUIO(4),
},
};
@@ -290,6 +289,14 @@ static struct gpio_led_platform_data h2_gpio_led_data = {
.num_leds = ARRAY_SIZE(h2_gpio_led_pins),
};
+static struct gpiod_lookup_table h2_leds_gpio_table = {
+ .table = {
+ GPIO_LOOKUP_IDX(OMAP_GPIO_LABEL, 3, NULL, 0, 0),
+ GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, NULL, 1, 0),
+ { },
+ },
+};
+
static struct platform_device h2_gpio_leds = {
.name = "leds-gpio",
.id = -1,
@@ -417,6 +424,7 @@ static void __init h2_init(void)
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
+ gpiod_add_lookup_table(&h2_leds_gpio_table);
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
--
2.37.2
