Re: [PATCH 3/3] drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liu,

On 14.08.22 г. 17:27 ч., Yongqin Liu wrote:
Hi, IvayIo

Thanks very much for the reply!

On Sat, 13 Aug 2022 at 14:58, Ivaylo Dimitrov
<ivo.g.dimitrov.75@xxxxxxxxx> wrote:

Hi Liu,

On 12.08.22 г. 7:35 ч., Yongqin Liu wrote:
Hi, Ivaylo, Tomi

We have one X15 Android AOSP master build, it could not have the home
screen displayed
on the hdmi monitor connected with this change, with the following
message printed on the serial console
      [  607.404205] omapdrm omapdrm.0: Failed to setup plane plane-0
      [  607.410522] omapdrm omapdrm.0: Failed to setup plane plane-1
      [  607.416381] omapdrm omapdrm.0: Failed to setup plane plane-2
      [  607.422088] omapdrm omapdrm.0: Failed to setup plane plane-3

     # for details, please check the link here: http://ix.io/47m1

It will work with home screen displayed on the hdmi monitor if this
change is reverted.

Is this the broken problem you talked about here?

And could you please give some suggestions on how to have the x15
Android build work with this change?


Make sure scanout (i.e. those to be displayed) buffers are actually
allocated as such - OMAP_BO_SCANOUT flag must be set when calling
omap_bo_new().

I am not familiar with this area, I am sorry if I asked quite silly questions:(
I googled omap_bo_new, and found it's a function of libdrm here[1], is
it what you meant here?


Yes, calling this function from userspace ends in kernel code the $subject patch is part of.

If it's the omap_bo_new that we should pass OMAP_BO_SCANOUT when it is called,
then is it the correct way to update omap_bo_new to add the OMAP_BO_SCANOUT flag
before it calls omap_bo_new_impl?


omap_bo_new() is fine and does not need any updates/fixes, it is the code that uses it (whoever it is, I am not familiar with the userspace you are using) that shall pass correct flags (third parameter) when calling it.

BTW you shall really find who and how uses OMAP BO API, in theory it might use ioctls directly and not call omap_bo_xxx functions. strace would be your friend there. or gdb, or whatever tools are used on android. Or put some printfs() in omap_bo_new() that output the PID of the calling process, etc.

And another question is that, since the userspace(libdrm) will be used
to work with different kernel versions,
like the old 4.14, 4.19, etc, do you think there will be problem to
pass  OMAP_BO_SCANOUT
from the userspace side with the old kernels(which does not have this change)?
does this change need to be backported to the old kernel versions?

There should not be any issue. The changes could be backported if one hits the issues this $series is fixing, but there is no need.


And the last question is that, omap_bo_new might be called by some
property binaries what not everyone
could get the source to update, for such case what's your suggestions?


Hard to say without knowing what that library would be.

When I hit issues with closed blobs, sometimes I reverse-engineer them to fix the issue, example:

https://github.com/maemo-leste/sgx-ddk-um/tree/master/dbm

This is REed libdbm from sgx-ddk-um 1.17.4948957, that is responsible for allocating BOs (what omap_bo_new() does) but it uses DUMB buffers API, instead of OMAP BO API.

I guess you are using some older version of sgx-ddk-um, so you may fix in similar way. Or binary patch.

Regards,
Ivo

[1]: https://gitlab.freedesktop.org/mesa/drm/-/blob/main/omap/omap_drm.c#L227

Thanks,
Yongqin Liu
On Thu, 17 Feb 2022 at 23:29, Ivaylo Dimitrov
<ivo.g.dimitrov.75@xxxxxxxxx> wrote:



On 17.02.22 г. 14:46 ч., Tomi Valkeinen wrote:
Hi,

On 19/01/2022 12:23, Ivaylo Dimitrov wrote:
On devices with DMM, all allocations are done through either DMM or
TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is
that
with time DMM/TILER space gets fragmented to the point that even if we
have
enough free DMM/TILER space and free memory, allocation fails because
there
is no big enough free block in DMM/TILER space.

Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are
allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.

Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.

Doesn't this break users that get a buffer from omapdrm and expect it to
be contiguous?


If you mean dumb buffer, then no, this does not break users as dumb
buffers are allocated as scanout:

https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/omapdrm/omap_gem.c#L603

If you mean omap_bo allocated buffers, then if users want
linear(scanout) buffer, then they request it explicitly by passing
OMAP_BO_SCANOUT.

Ivo









[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux