Hi,
[keeping only individuals and lists in Cc to avoid bounces]
On 28/06/22 16:03, Uwe Kleine-König wrote:
> From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
>
> The value returned by an i2c driver's remove function is mostly ignored.
> (Only an error message is printed if the value is non-zero that the
> error is ignored.)
>
> So change the prototype of the remove function to return no value. This
> way driver authors are not tempted to assume that passing an error to
> the upper layer is a good idea. All drivers are adapted accordingly.
> There is no intended change of behaviour, all callbacks were prepared to
> return 0 before.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
For versaclock:
> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
> index e7be3e54b9be..657493ecce4c 100644
> --- a/drivers/clk/clk-versaclock5.c
> +++ b/drivers/clk/clk-versaclock5.c
> @@ -1138,7 +1138,7 @@ static int vc5_probe(struct i2c_client *client)
> return ret;
> }
>
> -static int vc5_remove(struct i2c_client *client)
> +static void vc5_remove(struct i2c_client *client)
> {
> struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
>
> @@ -1146,8 +1146,6 @@ static int vc5_remove(struct i2c_client *client)
>
> if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
> clk_unregister_fixed_rate(vc5->pin_xin);
> -
> - return 0;
> }
>
> static int __maybe_unused vc5_suspend(struct device *dev)
Reviewed-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
Reviewed-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
--
Luca
