Hi Daniel,
Le 25/02/2022 à 12:46, Daniel Lezcano a écrit :
>
> Hi Romain,
>
> I'll apply the patch.
You're welcome!
>
> In the future, use the scripts/get_maintainer.pl -f <file> to get the recipients
> of your patch if you have a doubt about who to send it to.
I wasn't sure if it was needed to send the patch to both mailing list.
I was only subscribed to linux-omap until now.
Best regards,
Romain
>
> Thanks
>
> -- Daniel
>
> On 18/02/2022 11:47, Romain Naour wrote:
>> Expose ti-soc-thermal thermal sensors as HWMON devices.
>>
>> # sensors
>> cpu_thermal-virtual-0
>> Adapter: Virtual device
>> temp1: +54.2 C (crit = +105.0 C)
>>
>> dspeve_thermal-virtual-0
>> Adapter: Virtual device
>> temp1: +51.4 C (crit = +105.0 C)
>>
>> gpu_thermal-virtual-0
>> Adapter: Virtual device
>> temp1: +54.2 C (crit = +105.0 C)
>>
>> iva_thermal-virtual-0
>> Adapter: Virtual device
>> temp1: +54.6 C (crit = +105.0 C)
>>
>> core_thermal-virtual-0
>> Adapter: Virtual device
>> temp1: +52.6 C (crit = +105.0 C)
>>
>> Similar to imx_sc_thermal d2bc4dd91da6095a769fdc9bc519d3be7ad5f97a.
>>
>> No need to take care of thermal_remove_hwmon_sysfs() since
>> devm_thermal_add_hwmon_sysfs() (a wrapper around devres) is
>> used. See c7fc403e40b0ea18976a59e968c23439a80809e8.
>>
>> Signed-off-by: Romain Naour <romain.naour@xxxxxxxx>
>> ---
>> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
>> b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
>> index f84375865c97..0959632b2170 100644
>> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
>> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
>> @@ -21,6 +21,7 @@
>> #include "ti-thermal.h"
>> #include "ti-bandgap.h"
>> +#include "../thermal_hwmon.h"
>> /* common data structures */
>> struct ti_thermal_data {
>> @@ -189,6 +190,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
>> ti_bandgap_set_sensor_data(bgp, id, data);
>> ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
>> + if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
>> + dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
>> +
>> return 0;
>> }
>>
>
>
