On Tue, 12 Oct 2021 at 12:38, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > Enable runtime PM for eMMC/SD card devices. Without this, SDIO WLAN > devices will not idle. Just wanted to add some clarification. If the platform is able to idle SDIO card/func devices, you can set MMC_CAP_POWER_OFF_CARD. MMC_CAP_AGGRESSIVE_PM is for eMMC and SD. Perhaps we should consider merging the capabilities flags, as they are in principle indicating the same thing. Anyway, that's a different story. Kind regards Uffe > > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > --- > drivers/mmc/host/sdhci-omap.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c > --- a/drivers/mmc/host/sdhci-omap.c > +++ b/drivers/mmc/host/sdhci-omap.c > @@ -1343,6 +1343,9 @@ static int sdhci_omap_probe(struct platform_device *pdev) > /* R1B responses is required to properly manage HW busy detection. */ > mmc->caps |= MMC_CAP_NEED_RSP_BUSY; > > + /* Enable runtime PM for eMMC/SD card devices */ > + mmc->caps |= MMC_CAP_AGGRESSIVE_PM; > + > ret = sdhci_setup_host(host); > if (ret) > goto err_rpm_put; > -- > 2.33.0
