> Am 01.10.2021 um 09:54 schrieb Andreas Kemnade <andreas@xxxxxxxxxxxx>:
>
> On Sat, 9 Jan 2021 11:01:03 -0600
> Adam Ford <aford173@xxxxxxxxx> wrote:
>
>> Previously, the 1GHz variants were marked as a turbo,
>> because that variant has reduced thermal operating range.
>>
>> Now that the thermal throttling is in place, it should be
>> safe to remove the turbo-mode from the 1GHz variants, because
>> the CPU will automatically slow if the thermal limit is reached.
>>
>> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
>> ---
>> V2: The orignal patch had the wrong file added. Add the omap36xx.dtsi
>>
> hmm, I somehow expected that there is a revert of this thing going
> through. But now, the turbo-mode is still missing
tagging by turbo-mode means the OPP is *disabled* by default and
needs to be enabled actively.
> and I understood the
> revert is only in Nikolaus' trees.
It is just a revert for the gta04a5 because I think it is the only board
which is affected (maybe it would need SmartReflex in operation to
fine tune the OPPs compared to the generic table). Therefore I have
a patch which adds turbo-mode to the gta04a5.dts
> The 1Ghz mode was working for some
> time but does not anymore. Is it just me or do others also have the
> same problems?
That would be interesting to know.
BR,
NIkolaus
>
>
>> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
>> index 05fe5ed127b0..20844dbc002e 100644
>> --- a/arch/arm/boot/dts/omap36xx.dtsi
>> +++ b/arch/arm/boot/dts/omap36xx.dtsi
>> @@ -72,7 +72,6 @@ opp1g-1000000000 {
>> <1375000 1375000 1375000>;
>> /* only on am/dm37x with speed-binned bit set */
>> opp-supported-hw = <0xffffffff 2>;
>> - turbo-mode;
>> };
>> };
>>
>
