On Thu, Jul 30, 2009 at 2:02 PM, John Sarman<johnsarman@xxxxxxxxx> wrote: > On Thu, Jul 30, 2009 at 4:36 PM, Laine Walker-Avina<lwalkera@xxxxxxxx> wrote: >> Hi, >> >> I've been trying to get the EHCI USB host port on the beagleboard to >> work but with little success. The board initial finds the usb devices >> plugged into a hub on boot, but once I'm able to login, I get a >> disconnect notice on the hub and the port will no longer recognize any >> usb device inserted until reboot. Any ideas what's going on? I'm using >> the current master branch of the omap git repo. > > Do you have it connected to an external self powered USB hub, or > direct connect ? > Also is it a high spped device, I think the transaction translator can > only support high speed, but have not verified that. > >> >> Thanks, >> Laine Walker-Avina It's a high speed, self-powered hub, with various devices connected. -Laine -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
