On Fri, Jun 25, 2021 at 1:34 AM Pali Rohár <pali@xxxxxxxxxx> wrote: > > gpiod_set_value(gpiod, 1) == assert the line > > gpiod_set_value(gpiod, 0) == de-assert the line > > Problem is that some pci controller drivers (e.g. pci-j721e.c or > pcie-rockchip-host.c) expects that gpiod_set_value_cansleep(gpiod, 1) > de-asserts the line and it is already used in this way. > > Which is opposite of the behavior which you wrote above. I sketched a way out of the problem using a quirk in gpiolib in another response. We have a few of these cases where we have to code our way out of mistakes, such things happen. The problem is common, and due to the fact that device tree authors ignores the flag GPIO_ACTIVE_HIGH (which has been around since the early days of device tree on PowerPC) instead they opt to do the inversion in code. Which violates the contract that the DT should describe the hardware. The ambition of the DT specifications/schemas are to be operating system independent, and this kind of stuff creates a situation where other operating systems can't use the specification without also going and looking at how Linux has implemented stuff. Which is against the ambition of the device tree work. > I would suggest to define enum/macro with word ASSERT and DEASSERT in > its name instead of just true/false boolean or 0/1 int. > > In case of this PERST# misunderstanding, having assert/deassert in name > should really help. Hm that looks useful, Bart &co what do you think? #define GPIOD_ASSERTED 1 #define GPIOD_DEASSERTED 0 in consumer.h, would that be helpful for users? Yours, Linus Walleij
