The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers. So, switch am335x-igep0033 to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port. Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> --- arch/arm/boot/dts/am335x-igep0033.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 7ec23d47a429..cc14415a4eb9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -93,12 +93,11 @@ }; }; -&mac { +&mac_sw { status = "okay"; }; -&davinci_mdio { - status = "okay"; +&davinci_mdio_sw { ethphy0: ethernet-phy@0 { reg = <0>; @@ -109,15 +108,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rmii"; - + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rmii"; + ti,dual-emac-pvid = <2>; }; &elm { -- 2.17.1