ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
---
arch/arm/boot/dts/dra7-l4.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 149144cdff35..a750f7829f79 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1159,7 +1159,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x20000 0x1000>;
uart3: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1562,7 +1562,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x66000 0x1000>;
uart5: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1594,7 +1594,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x68000 0x1000>;
uart6: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1626,7 +1626,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6a000 0x1000>;
uart1: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1658,7 +1658,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6c000 0x1000>;
uart2: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1690,7 +1690,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x6e000 0x1000>;
uart4: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2424,7 +2424,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x20000 0x1000>;
uart7: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2454,7 +2454,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x22000 0x1000>;
uart8: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2484,7 +2484,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x24000 0x1000>;
uart9: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -4530,7 +4530,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xb000 0x1000>;
uart10: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
--
2.31.1
